Siemens PCIL43 manual Installing and removing a hard disk, Installing a disk drive

Page 54

Expansions and configuration 10.4 Installing disk drives

Disk drive or removable disk rack installation

Steps for installing a disk drive in a horizontal drive carrier

1 Slide the disk drive into the carrier from the front.

2 Remove any vertical drive carrier The only way to get at the mounting screws on the right side of the drive is through the openings of the vertical carrier.

3 Mount the disk drive into the drive carrier using four screws.

4 Insert the drive carrier module again.

5 Connect the power and data cables to the disk drive.

10.4.3Installing and removing a hard disk

Preparation

1.Unplug the device from mains and disconnect all cables.

2.Open the device.

Installing a disk drive

Steps for installing a disk drive

Connect the power and data cables to the disk drive.

Hold the drive on the drive carrier plate and secure it with 4 screws

(1).

10-8	SIMATIC Rack PC IL 43
	Operating Instructions, Edition 09/2005, A5E00432875-01

Image 54

Contents Simatic Operating Instructions Edition 09/2005Page Industrial PC Rack PC IL Operating Instructions Edition 09/2005Safety Guidelines Table of contents 10-1 Glossary Glossary-1 Table of contents Introduction PrefaceContents format Table of Contents Guide for the operating instructionsRepairs Safety informationGeneral safety instructions System expansionsBattery ESD guidelinesDescription OverviewAreas of application HighlightsHighlights Features General featuresFunction Monitoring functions Optional accessoriesInterfaces Standard versionsOptional accessories Disk drives DVD ROMOptional expansions Front view of the device Pos Description DesignExternal structure Rear view of the device Pos DescriptionOperator controls Operator control on/off button Pos DescriptionLayout of the interfaces on the rear of the device Connecting elementsInterfaces Pos Name DescriptionStatus displays Power supplyPosition of the IEC power plug Description Status displays Display MeaningDescription 3.6 Design Unpacking and checking the delivery unit Deployment planningTransport Unpacking the deviceNoting the device identification data Device equipmentAmbient and environmental conditions Deployment planning Ambient and environmental conditions Possible areas of installation InstallationInstalling the device Possible mounting methodsInstallation Installing the device Connecting Connecting peripheralsConnecting the device to power To be noted before you connect the deviceConnecting Steps for connecting the device to mainsLocalized information Secure the power plug Steps in securing the power plugBasic commissioning initial power-up CommissioningPrerequisites for commissioning Switch off the device Burner/DVD player softwareDVD burner Burner softwareReplacing a hard disk RAID Software Sata interface Installation locationRemovable hard disks SATA1RAID system 4MS08NVVFunctions for RAID system management Comments about faults Replace faulty drive in RAID systemSide panel Associate new hard drive Commissioning Integration EthernetFurther information Integration Functions Temperature monitoring/displayTemperature monitoring Overview of the following monitoring functionsWatchdog WD Fan monitoringFunction Tools Expansions and configurationOpen the device PreparationOpen the device Steps for opening the enclosure coverSteps for opening the device front Installing expansion cards Memory expansionMemory expansion options Installing an expansion module Installing expansion modulesSteps for installing an expansion module Installing and removing a disk drive or removable rack Installing disk drivesOptions of installing disk drives Pos DescriptionRemoving the drive carrier module Steps for removing the drive carrier moduleInstalling a disk drive Installing and removing a hard diskDisk drive or removable disk rack installation Steps for installing a disk driveRepairs Maintenance and serviceRemoving and installing hardware components Carrying out repairsReplacing the battery Reconfiguring the Bios Setup Replacing the backup batteryTo be noted before you replace the battery DisposalRemoving the power supply module Removing the power supply moduleHow to remove the power supply module How to remove the motherboard Removing the motherboardRemoving the motherboard Remove filter and fan Remove filter and device fanPreparing for equipment fan exchange StepsHow to remove the processor Processor replacementInstalling the fan Removing the processor11-7 Recovery CD Reinstalling the softwareGeneral installation procedure Restore DVDInstalling Windows Booting with the CD RecoveryRestoring the factory state Setting up the partitions for Windows operating systems Setting up partitionsInstalling Microsoft Windows operating systems Format primary partitionSetting up the language selection for Windows 2000 MUI Setting up the language selection for Windows 2000 MUIInstalling drivers and software Maintenance and service Reinstalling the software Troubleshooting General problemsProblem Possible cause To correct or avoid error Problems when using modules of third-party manufacturers General technical data Technical data13.1 General specifications SafetyMech. Ambient conditions Special FeaturesClimatic Conditions MotherboardGraphics COM1Certifications Status displays LEDsStandard system Power requirements of components maximum valuesAC voltage supply Output voltageTechnical data of the telescopic rails Dimensional drawings Dimensional drawing of the deviceDimensional drawing for the use of telescopic rails Dimensional drawing for the use of telescopic railsDetailed descriptions MotherboardSystem resources Bios Setup Tab Option SettingGuidelines and declarations Software License Agreement Certificates and approvalsDIN ISO 9001 certificate Certification for the USA, Canada and AustraliaEMC Training center Service and supportFurther support Technical SupportService & Support on the Internet Figure A-1 For the temperature range 5 to 35 C Retrofitting instructionsESD Guidelines What does ESD mean?Electrical charge Figure B-1 Electrostatic voltages on an operatorAbbreviations Abbreviation Term DefinitionCmos CGACLK COAEisa FAQEide EMMIgbt IDEIEC IrdaPcmcia PataPCI PICSdram SataScsi SelvWlan VRMWAV WWWAbbreviations Glossary Configuration files Boot disketteBooting Configuration softwareDisc-at-once Device configurationController DriversHard disks FormattingGender changer HubLicense key IT networksLegacy USB support License key disketteOperating system PasswordMotherboard Packet writingPixel ResetRestore CD Remove module bracketSerial interface Setup Bios SetupTroubleshooting Session at onceWindows WlanGlossary-10 Index CD-R / CD-RWIndex Index VGA Page Siemens AG