![](/images/new-backgrounds/1264302/2643029x1.webp)
3.MAIN UNIT REPLACEMENT
3.1 PS Unit
3. MAIN UNIT REPLACEMENT
WARNING!
Turn the power off and disconnect the power cord before replacing the main parts.
3.1 PS Unit
1.Remove the screw from the back of the printer, and draw out the PS Unit halfway.
NOTE: If the PS Unit cannot be drawn out smoothly, check whether it gets stuck with the harnesses on both sides.
PS Unit
2.Unlock the connectors of the cables connected to CN1 and CN2 on the PS PC Board, and disconnect the cables.
CN2
CN1
3. Remove the two screws to detach the Inlet Ass’y.
Inlet Ass’y
3- 1