Back to Contents Page
NVRAM Module
Dell™ OptiPlex™ FX160/160 Service Manual
Removing the NVRAM Module
Replacing the NVRAM Module
Removing the NVRAM Module
1.Perform the procedure in Before Working on Your Computer.
2.Remove the hard drive bracket assembly, if installed (see Removing the Hard Drive Bracket Assembly).
3.Remove the screw that secures the NVRAM module to the system board with a Phillips #1 screwdriver.
1 | NVRAM module |
|
|
4. Lift the NVRAM module straight up from the system board.
Replacing the NVRAM Module
1.Align the NVRAM module connectors with the connectors on the system board and push down (see System Board Connectors).
2.Secure the NVRAM module to the system board with the screw.
3.Replace the hard drive bracket assembly if it was removed (see Replacing the Hard Drive Bracket Assembly).
.