Dell GX200 manual Expansion Cards, System-Board Jumper Settings Description, System Board Labels

Table 1. System-Board Jumper Settings

Jumper	Setting		Description
PSWD	(default)		Password features are enabled.
	(default)		Password features are disabled.
SAFE	(default)		Reserved (do not change).
BIOS	(default)		Reserved (do not change).
RTCRST	(default)		Real-time clock reset. Can be used for troubleshooting purposes.
jumpered		unjumpered

System Board Labels

Table 2 lists the labels for connectors and sockets on your system board, and it gives a brief description of their functions.

Table 2. System Board Connectors and Sockets

Connector or Socket	Description
AMC	ATI multimedia channel connector
BATTERY	Battery socket
CD_IN	CD-ROM audio interface connector
RIMM_x	RIMM socket
DSKT	Diskette/tape drive interface connector
ENET	Integrated NIC connector
EXT_SPKR	External speaker connector
FAN	Microprocessor fan connector
HDLED	Hard-disk drive LED connector
IDEn	EIDE interface connector
INTRUDER	Chassis intrusion switch connector
KYBD	Keyboard connector
MODEM	Modem audio connector
MONITOR	Video connector
MOUSE	Mouse connector
PANEL	Control panel connector
PARALLEL	Parallel port connector; sometimes referred to as LPT1
PCIn*	PCI expansion-card connector
POWER_1	Main power input connector
POWER_2	3.3-V power input connector
RISER	Riser board connector
SERIALn	Serial port connector
SLOT1_PRI	Primary microprocessor connector
USB	USB connectors

Expansion Cards

Each GX200 low-profile chassis can accommodate 32-bit PCI expansion cards and 16-bit and 8-bit ISA expansion cards, depending on the installed riser board. See Figure 19 for examples of the expansion cards.

Figure 19. Expansion Cards