Dell GX200 manual Expansion Cards

Page 30

CD_IN	CD-ROM audio interface connector

RIMM_x	RIMM socket


DSKT	Diskette/tape drive interface connector


ENET	Integrated NIC connector


EXT_SPKR	External speaker connector


FAN	Microprocessor fan connector


HDLED	Hard-disk drive LED connector


IDEn	EIDE interface connector


INTRUDER	Chassis intrusion switch connector


KYBD	Keyboard connector


MODEM	Modem audio connector


MONITOR	Video connector


MOUSE	Mouse connector


PANEL	Control panel connector


PARALLEL	Parallel port connector; sometimes referred to as LPT1


PCIn*	PCI expansion-card connector


POWER_1	Main power input connector


POWER_2	3.3-V power input connector


RISER	Riser board connector


SERIALn	Serial port connector


SLOT1_PRI	Primary microprocessor connector


USB	USB connectors

Expansion Cards

The system accommodates up to six expansion cards, including up to five 32-bit PCI expansion cards and one 32-bit AGP card. (See Figure 16 for examples of these cards.)

NOTES: Before disconnecting a peripheral from the system or removing a component from the system board, verify that the standby power LED on the system board is off. For the location of this LED, see Figures 19 and 20.

Figure 16. Expansion Cards

18-bit ISA expansion card

216-bit ISA expansion card

332-bit PCI expansion card

Expansion-Card Removal

To remove an expansion card, perform the following steps:

1.Remove the computer cover.

2.Remove the expansion-card cage.

3.If necessary, disconnect any cables connected to the card.

4.Unscrew the mounting bracket of the card you want to remove.

Image 30

Contents Initial release 18 April Last revised 31 Jul Recommended Tools Precautionary MeasuresOverview You have removed the computer coverInternal Views Computer CoverComputer Cover Replacement Eject, Power, and Reset Buttons Front-Panel InsertsChassis Intrusion Switch Reset the chassis intrusion detectorControl Panel Inch Drive DrivesInch Diskette Drive Remove the diskette drive and bracketHard-Disk Drive to Bracket Installation If not already done, remove the computer coverSystem Power Supply Replace the computer coverExpansion-Card Cage Riser BoardsSystem Board Components PCI/ISA Riser Board OptionalSystem Board Jumpers System-Board Jumper Settings Description Expansion CardsSystem Board Labels Expansion-Card Installation Expansion-Card RemovalRemove the computer cover Memory Removing a RimmMicroprocessor/Cooling Fan/Heat Sink Assembly Microprocessor/Cooling Fan/Heat Sink AssemblySystem Battery Microprocessor Package InstallationSystem Board System Board RemovalBack to Contents Microprocessor/Airflow Shroud/Heat Sink Assembly Computer Cover Internal View Inside the ChassisExpansion-Card Cage Remove the hard-disk drive cage Inch Diskette Drive RemovalInch Drive Removal 25-Inch Drive Removal Hard-Disk Drive Replacement Hard-Disk Drive Insertion System Power Supply Rotation System Power Supply RemovalRotate the system power supply System Power Supply InstallationSystem Board Jumpers Expansion Cards Expansion-Card Replacement Expansion Card RemovalMidsize Chassis PCI Riser Board Microprocessor/Airflow Shroud/Heat Sink Assembly Rimm InstallationHeat Sink Assembly Removal Securing the microprocessor package Disconnect all cables from the system board Back to Contents Overview Mini Tower Chassis Orientation View Computer Cover Replacement Front Bezel Front Bezel RemovalFront-Panel Inserts Chassis Intrusion Switch Remove the control panel from the front panel Diskette Drive RemovalRemove the front bezel Drive Bracket AttachmentNew Drive Insertion Remove the computer cover Remove the front bezel Hard-Disk Drive Removal From BracketDrive Bracket Insertion Into Chassis System Power Supply Mini Tower Chassis PCI Riser Board Mini Tower Chassis PCI/ISA Riser Board System Board Jumpers CD-ROM audio interface connector Expansion Card Installation Memory Microprocessor/Airflow Shroud/Heat Sink Removal Microprocessor package Socket release lever ZIF socket System Battery Remove the airflow shroud from the microprocessor Replace the airflow shroud Replace the expansion-card cage Overview Orientation View Computer Cover Replacement Eject and Power Buttons Remove the drive shelf Remove the power supplyChassis Intrusion Switch Preliminary Steps Hard-Disk DriveDrive Bracket Removal Hard-Disk Drive Cable Attachment CD-ROM Drive CD-ROM Drive RemovalSystem Power Supply Riser Board PCI Riser BoardSystem Board Jumpers System-Board Jumper Settings Description Bit PCI Expansion Card Example Expansion Card Removal Memory Microprocessor/Cooling Fan/Heat Sink Assembly Microprocessor Package Removal Replace the computer cover and restart the system Replace the drive shelf assembly