Dell GX200 manual Chassis Intrusion Switch

Page 43

1Control panel

2Control panel connector

3Chassis intrusion cable connector

4Chassis intrusion switch

To remove the control panel, perform the following steps:

1.Disconnect the control panel cable from the control panel connector on the system board (see "System Board Labels" for the location of the PANEL connector).

Note the routing of the control panel cable as you remove it from the chassis.

2.Disconnect the the chassis intrusion switch cable connector from the control panel.

3.Remove the mounting screw that secures the control panel to the chassis.

4.Remove the control panel cable.

5.Pull the control panel cable through the opening in the front wall, and carefully remove the cable from the routing tab in the chassis.

6.Pull out on the control panel to detach it from the chassis.

Note the routing of the control panel cable as you remove it from the chassis.

Chassis Intrusion Switch

Figure 9. Chassis Intrusion Switch Removal

1Control panel

2Control panel cable connector

3Chassis intrusion cable connector

4Chassis intrusion switch

To remove the chassis intrusion switch, perform the following steps:

Image 43

Contents Initial release 18 April Last revised 31 Jul You have removed the computer cover Precautionary MeasuresOverview Recommended ToolsComputer Cover Internal ViewsComputer Cover Replacement Front-Panel Inserts Eject, Power, and Reset ButtonsReset the chassis intrusion detector Chassis Intrusion SwitchControl Panel Remove the diskette drive and bracket DrivesInch Diskette Drive Inch DriveIf not already done, remove the computer cover Hard-Disk Drive to Bracket InstallationReplace the computer cover System Power SupplyRiser Boards Expansion-Card CagePCI/ISA Riser Board Optional System Board ComponentsSystem Board Jumpers Expansion Cards System-Board Jumper Settings DescriptionSystem Board Labels Expansion-Card Removal Expansion-Card InstallationRemove the computer cover Removing a Rimm MemoryMicroprocessor/Cooling Fan/Heat Sink Assembly Microprocessor/Cooling Fan/Heat Sink AssemblyMicroprocessor Package Installation System BatterySystem Board Removal System BoardBack to Contents Microprocessor/Airflow Shroud/Heat Sink Assembly Computer Cover Inside the Chassis Internal ViewExpansion-Card Cage Inch Diskette Drive Removal Remove the hard-disk drive cageInch Drive Removal 25-Inch Drive Removal Hard-Disk Drive Insertion Hard-Disk Drive ReplacementSystem Power Supply Removal System Power Supply RotationSystem Power Supply Installation Rotate the system power supplySystem Board Jumpers Expansion Cards Expansion Card Removal Expansion-Card ReplacementMidsize Chassis PCI Riser Board Rimm Installation Microprocessor/Airflow Shroud/Heat Sink AssemblyHeat Sink Assembly Removal Securing the microprocessor package Disconnect all cables from the system board Back to Contents Overview Mini Tower Chassis Orientation View Computer Cover Replacement Front Bezel Removal Front BezelFront-Panel Inserts Chassis Intrusion Switch Diskette Drive Removal Remove the control panel from the front panelDrive Bracket Attachment Remove the front bezelNew Drive Insertion Hard-Disk Drive Removal From Bracket Remove the computer cover Remove the front bezelDrive Bracket Insertion Into Chassis System Power Supply Mini Tower Chassis PCI Riser Board Mini Tower Chassis PCI/ISA Riser Board System Board Jumpers CD-ROM audio interface connector Expansion Card Installation Memory Microprocessor/Airflow Shroud/Heat Sink Removal Microprocessor package Socket release lever ZIF socket System Battery Remove the airflow shroud from the microprocessor Replace the airflow shroud Replace the expansion-card cage Overview Orientation View Computer Cover Replacement Remove the drive shelf Remove the power supply Eject and Power ButtonsChassis Intrusion Switch Hard-Disk Drive Preliminary StepsDrive Bracket Removal Hard-Disk Drive Cable Attachment CD-ROM Drive Removal CD-ROM DriveSystem Power Supply PCI Riser Board Riser BoardSystem Board Jumpers System-Board Jumper Settings Description Bit PCI Expansion Card Example Expansion Card Removal Memory Microprocessor/Cooling Fan/Heat Sink Assembly Microprocessor Package Removal Replace the computer cover and restart the system Replace the drive shelf assembly