Dell G7279, MTC2, DMC manual Existing hard drive, Screws, Drive bracket

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

5Remove the computer cover.

NOTICE: Before touching anything inside your computer, ground yourself by touching an unpainted metal surface, such as the metal at the back of the computer. While you work, periodically touch an unpainted metal surface to dissipate any static electricity that could harm internal components.

6Remove the existing hard drive.

7Remove the additional hard drive bracket from the computer:

a Remove the bracket-securing screws for the additional drive.

b Remove the bracket for the additional drive from the computer.

8If you are replacing the additional hard drive, remove the drive from the bracket: a Remove the hard drive-securing screws.

b Remove the hard drive from the bracket.

empty drive bracket for second hard drive

existing hard drive

bracket-securing screw

hard drive-securing

screws (3)

drive bracket

bracket-securing screw

NOTICE: Ground yourself by touching an unpainted metal surface on the back of the computer.

NOTICE: When you unpack the drive, do not set it on a hard surface, which may damage the drive. Instead, set the drive on a soft surface, such as a foam pad, that will sufficiently cushion it.

64

Adding Parts