Dell 745N manual Configuring Your System Using a Keyboard, Monitor, and Mouse

6.From a client system on the same network, open Microsoft® Internet Explorer 6.0 or later, type the default system name in the Web address field, and press <Enter>.

The default system name is Dellxxxxxxx, where xxxxxxx is the system's service tag number. For example, if your service tag number is 1234567, enter http://DELL1234567.

You can also access the system directly through secure port 1279 by connecting to https://DELLxxxxx:1279 where xxxxxxx is the system's service tag number.

NOTE: If you cannot connect to the system through a Web browser, you must use a keyboard, monitor, and mouse to configure the IP address, gateway subnet mask, and DNS server. See "Configuring Your System Using a Keyboard, Monitor, and Mouse."

7.Enter the default administrative user name and password for your system when prompted, and then click OK. NOTE: The default administrative user name is administrator and the default password is powervault.

8.Use the NAS Manager to begin setting up shares and volumes on the NAS system.

See "NAS Manager."

Configuring Your System Using a Keyboard, Monitor, and Mouse

1.Connect one end of an Ethernet cable into one of the 10/100/1000 RJ-45 NIC connectors (see Figure 1-1) on the back of your NAS system.

For more information on the location of system connectors, see the User's Guide.

2.Connect the other end of the Ethernet cable to a functioning Ethernet jack.

3.Connect one end of the power cable to the NAS system and the other end to a power source.

4.Connect a keyboard, monitor, and mouse to the NAS system.

For information about system connectors, see your User's Guide.

5.Push the power button to turn on the NAS system.

6.Log in to the NAS system.

NOTE: The default administrative user name is administrator and the default password is powervault.

7.Log in to the NAS Manager.

For more information, see "Logging Into the NAS Manager."

8.Configure the IP address.