You cannot extend a volume if any of the following are true:
•The volume is formatted as FAT or FAT32.
•The volume is using software RAID (striped, mirrored, or RAID 5 volume).
•Unallocated space is not available on a dynamic disk.
You can extend simple and spanned volumes on dynamic disks onto a maximum of 32 dynamic disks. However, after a volume is extended, it cannot be mirrored or striped using software RAID. Also, no portion of a spanned volume can be deleted without deleting the entire spanned volume.
1.
The selected volume appears in the dialog box along with its current size.
2.Enter the amount to extend the volume, and then click OK.
3.Click OK.
The volume now shows the size of the extended volume.
For more information about extending volumes, see the
Enabling and Disabling Hard Disk Write Cache on Software RAID NAS Systems.
1.Log in to the NAS Manager.
2.Click Maintenance→ Remote Desktop, and log in to your NAS system
NOTE: The NAS Manager default administrator user name is administrator and the default password is powervault.
3.On the system desktop, right click on My Appliance and select Manage.
4.From the Computer Management MMC, select Device Manager from the left frame.
5.In the right panel, expand Disk Drives by clicking +.
A list of the hard drives attached to the integrated SATA controller is displayed.
6.Right click the hard drive for which you wish to enable or disable write cache, and click Properties.
7.On Disk Device Properties, click the Policies tab.
8.Enable or disable write cache on the hard drive by checking or unchecking the box next to Enable Write Caching on Disk.
NOTICE: Enabling write cache, which causes data to be cached by the drive before it is written to disk, may lead to data loss if the system loses power. To prevent data loss, Dell recommends using a UPS with your system if write cache is enabled.
9.If enabling write cache, select Enable Advanced Performance.
This option causes application requests to bypass disk write caching to be ignored.
10.Click OK to apply changes.
Back to Contents Page