Dell 745N manual Accessing a RAC From the NAS Manager, Reinstalling the RAC Software

See the Dell OpenManage Remote RACADM User's Guide for information about running the Remote Access Service from the command line.

When using the Remote Access Service, you can click Help on the global navigation bar for more detailed information about the specific window you are viewing. Remote Access Service help is available for all windows accessible to the user based on user privilege level and the specific hardware and software groups that Server Administrator discovers on the managed node system.

Accessing a RAC From the NAS Manager

You can display or change the IP address or create or change the user name and password of the RAC administrator.

To access a RAC from the NAS Manager, perform the following steps:

1.Log in to the NAS Manager.

2.Click Maintenance.

3.Click Server Administrator, and then log in to the NAS system as an administrator.

NOTE: The default administrative user name is administrator and the default password is powervault.

4.In Server Administrator, click System, click Main System Chassis, and then click Remote Access Controller.

5.Click Remote Connect.

6.Click Configuration to configure the IP address.

7.Click Log in to Remote Connect Interface.

Reinstalling the RAC Software

After a DRACIII/XT card is added to or removed from the system, you must reinstall the Dell OpenManage Server Administrator software. To reinstall the software, perform the following steps:

1.Log in to the NAS Manager.

2.Click Maintenance.

3.Click Remote Desktop.

4.Click Server Administrator, and then log in to the NAS system as an administrator.

NOTE: The default administrative user name is administrator and the default password is powervault.

5.Browse to the C:\Dell\install\sysmgmt directory.

6.Double-click the file named update.bat.

The Dell OpenManage Server Administrator software reinstalls. The reinstallation might take several minutes.

7.When the reinstallation completes, reboot your NAS system.

Additional Information About RACs

See the Dell Remote Access Controller Installation and Setup Guide for complete information about installing and configuring RAC software.

NOTE: The default user name and password for a RAC on the NAS system are administrator and powervault respectively, which differs from the user name and password in the RAC documentation.