NETGEAR WNR1000v3h2 manual QoS for a MAC Address

N150 Wireless Router User Manual

Figure 11.

4.From the LAN port list, select the LAN port that will have a QoS policy.

5.From the Priority drop-down list, select the priority that this port’s traffic should receive relative to other applications and traffic when accessing the Internet. The options are Low, Normal, High, and Highest.

6.Click Apply to save this rule to the QoS Policy list and return to the QoS Setup screen.

7.Click Apply.

QoS for a MAC Address

To create a QoS policy for traffic from a specific MAC address:

1.From the main menu, under Advanced, select QoS Setup. The QoS Setup screen displays, as shown in Figure 8 on page 69.

2.Click Setup QoS Rule and then click Add Priority Rule.

3.On the QoS - Priority Rules screen, go to the Priority Category field, and select MAC Address from the drop-down list:

Figure 12.

4.If the device to be prioritized appears in the MAC Device List, select it. The information from the MAC Device List is used to populate the policy name, MAC Address, and Device Name fields. If the device does not appear in the MAC Device List, click Refresh. If it still does not appear, you must complete these fields manually.

72 Chapter 5: Fine-Tuning Your Network