APC MX28B-1200, MX28B-2400 manual Environmental, Mechanical, Compliance

Page 17

Revision B

MX28B-1200 PRODUCT MANUAL

distribution section with the front cover removed.

Alternate circuit breaker configurations are available in order for the power frames to provide support for larger individual load connections. Six circuit breakers in the 100 amp to 400 amp range or four circuit breakers in the 225 to 700 amp range in a panel-mount arrangement can be specified instead of the distribution module with 48 plug-in breakers.

Optional power distribution box frames can be added to a power system to support additional circuit breakers or telecom fuses. Auxiliary alarm contacts from circuit breakers can be brought back to the control unit through the use of an alarm extension printed circuit board in each bay. Ten fuses outputs can also be directly monitored by the control unit.

4.8 Environmental

 

 

Ambient Temperature:

-20°C to +65°C operating

 

 

-40°C to +85°C storage

Humidity:

0% to 85%

RH non-condensing operating

 

 

0% to 95%

RH non-condensing storage

Altitude:

Up to 3000m, operating

 

 

Up to 10,000m, storage

4.9 Mechanical

 

Weight:

Base Power Frame – 400 to 600 lbs. (181 to 272 kg)

 

 

Extension Power Frame – 400 to 600 lbs. (181 to 272 kg)

 

 

Rectifier - 11 lbs. (5 kg.)

Dimensions

Box Frame: 84” high x 26” wide x 26” deep

 

 

(2134 mm x 660 mm x 660 mm)

Color:

Dawn Gray (fronts)

4.10 Compliance

 

• Safety

UL 1950

MX28B-1200/2400

11

Image 17
Contents Model MX28B-1200/2400 MX28B-1200 Product Manual Revision Date Description Revision HistoryTable of Contents Product Manual Page Introduction General InformationInspection upon Receipt of Goods General Visible External DamageReturn of Damaged Goods Concealed DamageCustomer Service and Support Page Warranty Returns Warranty ProvisionsWarranty Repair or Replacement General ProvisionsMX28B-1200 Product Manual Description Product Overview and Technical DescriptionMX28B-1200 System Diagram Control Unit Power Output CapacityRectifiers DC Distribution AC Input PowerBattery connections Compliance EnvironmentalMechanical Page Preparation Recommended Tools Installation ProceduresRecommended Test Equipment Equipment InspectionMounting Room/LocationsTerminal Block VentilationMX28B-1200 Product Manual Cable Sizing Considerations Battery Connections Battery DisconnectConnecting the Cables Multiple Frame Assembly Power Bus Connections Rectifier InstallationControl Wiring Extension Multi-Bay Wiring Diagram MX28B-1200 Product Manual Alarm Interface PC Board Alarm ConnectionsExternal Alarm Input Connections Alarm Outputs External Alarm InputsExternal Alarm Input Definition Plug-in Circuit Breakers Alarm Terminal Output Designation User Alarm Notes NO-NC-CFuse APC Part Rating 10 Fuse Bay Connections Power Distribution Fuse Load ConnectionsApply AC Power Battery Temperature Probe InstallationFull System Power Up Status Alarms System Modules Batt PIN OEMPage User Interface SETUP, ADJUSTMENTS, and OperationParameter Locations, Descriptions, and Default Values Alarm Output RelaysMX28B-1200 Product Manual Setup PIN AlarmsStatus System SET-ALMOUT-RLY RLY-MAP DateAlias IN-RLY RLY-MAPParam Modules Rect SET-ALMInfo Cirbkr SET-ALMAlias Fuse Fuse SET-ALMBatt SET-ALM LVD SET-ALMComp PIN OEMOFF APCMX28B-1200 Product Manual Rect 1ofN Alm m+ Test Relay Batt Disc Alm m+ 48V Fuse 1 Alm LVD2 LVD1MX28B-1200 Product Manual MX28B-1200 Product Manual