APC MX28B-2400, MX28B-1200 manual 48V

MX28B-1200 PRODUCT MANUAL		Revision B
(Table 6-1. Parameter Locations, Descriptions, and Default Values)
PARAMETER	DESCRIPTION	DISPLAY SCREENS /
		DEFAULT SETTINGS
Standby Alarm {1}	This alarm indicates that the control unit is holding a rectifier	Rect Stdby Almm+
[MODULES/RECT/SET-ALM]	in the standby mode.	n of N
Fan Fail Alarm {1}	This alarm indicates that a rectifier fan has failed.	Rect FF Alm	m+
[MODULES/RECT/SET-ALM]		n of N
RFA Alarm {1}	This alarm indicates that a rectifier output has failed.	Rect RFA Alm	m+
[MODULES/RECT/SET-ALM]		n of N
CIRCUIT BREAKER SETUP
Breaker 1 Alias {1}	An alternate name (alias) that can be assigned to a circuit	Cir Bkr 1	m+
[MODULES/CIRBKR/ALIAS]	breaker if desired.	-48V
•	•	•
•	•	•
•	•	•
Breaker 72 Alias {1}	An alternate name (alias) that can be assigned to a circuit	Cir Bkr 72	m+
[MODULES/CIRBKR/ALIAS]	breaker if desired.	-48V
Circuit Breaker Alarms
Breaker 1 Tripped {1}	An alarm that indicates Circuit Breaker 1 is tripped.	Cir Bkr 1 Alm m+
[MODULES/CIRBKR/SET-ALM]		Major
•	•	•
•	•	•
•	•	•
Breaker 72 Tripped {1}	An alarm that indicates Circuit Breaker 24 is tripped.	Cir Bkr 72 Almm+
[MODULES/CIRBKR/SET-ALM]		Major
FUSE SETUP
Fuse 1 Alias {1}	An alternate name (alias) that can be assigned to a Fuse 1 if	FUSE 1	+
[MODULES/FUSE/ALIAS]	desired.	-48V
•	•	•
•	•	•
•	•	•
Fuse 16 Alias {1}	An alternate name (alias) that can be assigned to a Fuse 16 if	FUSE 16	+
[MODULES/FUSE/ALIAS]	desired.	-48V

44 MX28B-1200/2400