APC AP9607 manual Warranty Information

Page 28

Warranty Information

Limited	American Power Conversion (APC) warrants the Interface
warranty	Expander to be free from defects in materials and workman-
	ship for a period of two years from the date of purchase. Its
	obligation under this warranty is limited to repairing or
	replacing, at its own sole option, any such defective prod-
	ucts. This warranty does not apply to equipment which has
	been damaged by accident, negligence, or misapplication or
	has been altered or modified in any way. This warranty
	applies only to the original purchaser.

Obtaining	To obtain service under warranty you must obtain a
service	Returned Material Authorization (RMA) number from APC
	or a designated APC service center. Products must be
	returned to APC or an APC service center with transporta-
	tion charges prepaid and must be accompanied by a brief
	description of the problem encountered and proof of date
	and place of purchase.

	Continued on next page

24

Image 28

Contents Interface Expander Thank You Contents Connection procedure Connecting the Interface Expander Introduction On next Hardware Software Requirements By the Interface Expander. When ordering a cable, provide Part NumberProduct Description Status Description Key Concepts Simple Signaling Smart SignalingCommunication Types PowerChute plus, configured for smart signaling, to moni UPS can provide simple signaling, we strongly recommendPowerChute plus Expander use simple signaling with PowerChute orSignaling. Use either one of these procedures UPS and continue with the installation, includingReboot of the system Run PowerChute plus and connect to the UPSInterface Expander generates a Low Battery signal Less of whether the UPS is on battery. The InterfaceExpander generates a Low Battery signal under certain Other conditions according to the configured shutdownKey Concepts Multiple SmartSlot Installation Multiple SmartSlot Installation Multiple SmartSlot Installation Installation Orient the Interface Expander to fit the accessory Slot. Slide the Interface Expander all the way intoSlot until the front panel is flush with the back Panel of the UPS or deviceConnecting to Protected Devices Described in Connection procedure on Configuring the Interface Expander Some versions of PowerChute plus do not support Con Firmed shutdown mode when set up for simple signalingPowerChute plus installation directory. To find out Whether your version of PowerChute plus supports ConIf power returns before any connected server has signaled UPS before all connected servers have signaled shutUPS battery is exhausted, shutting down the UPS after Low Battery Signal Time has elapsedExpander allows the UPS to run on battery until utility Power is restored, or until the battery is exhausted. IfInterface Expander detects a UPS Low Battery condition, it Equal to the Low Battery Signal Time and then shuts downTesting Interface Expander Warranty Information Claims by third parties, or otherwise. This warranty gives Purpose. Some jurisdictions do not permit limitation orExclusion of implied warranties therefore, the aforesaid Specifically, APC is not liable for any costs, such as lostTroubleshooting Problem Possible Cause Solution For problems not covered in the troubleshooting chart see Troubleshooting on page 26, or if the problemPersists, follow this procedure Lem. a technician will help solve the problem overLife-Support Policy Specifications Assignments Specification Interface ExpanderIndex Index Y, Z Page Application of Coun Cil Directives Standards to WhichConformity is DeclaredW. a p c c . c o m