D-Link DIR-68 manual Device Wizard

Page 53

Section 3 - Configuration

Add Wireless Station:

This Wizard helps you add wireless devices to the wireless network.

The wizard will either display the wireless network settings to guide you through manual configuration, prompt you to enter the PIN for the device, or ask you to press the configuration button on the device. If the device supports Wi-Fi Protected Setup and has a configuration button, you can add it to the network by pressing the configuration button on the device and then the on the router within 60 seconds. The status LED on the router will flash three times if the device has been successfully added to the network.

There are several ways to add a wireless device to your network. A “registrar” controls access to the wireless network. A registrar only allows devices onto the wireless network if you have entered the PIN, or pressed a special Wi-Fi Protected Setup button on the device. The router acts as a registrar for the network, although other devices may act as a registrar as well.

Add Wireless Start the wizard.

Device Wizard:

D-Link DIR-628 User Manual

53

Image 53
Contents Page Trademarks PrefaceManual Revisions Table of Contents Troubleshooting Wireless Basics Wireless SecurityTechnical Specifications Networking BasicsProductPackageOverviewContents Browser Requirements System RequirementsTotal Performance IntroductionFeatures Connections Hardware OverviewWCN LED LEDsBefore you Begin InstallationWireless Installation Considerations Turn on your computer Connect to Cable/DSL/Satellite ModemConnect to Another Router Installation Getting Started Web-based Configuration Utility ConfigurationClick Internet Connection Setup Wizard to begin Setup WizardConfiguration Configuration Configuration Dynamic Cable Manual ConfigurationConnection Internet SetupPptp Page L2TP Page Static assigned by ISP Mode 2.4GHz Wireless SettingsChannel Scan IP Address Subnet Mask Device Name Network SettingsDhcp Server Settings Secondary Wins IP Address TypeClients Dhcp ReservationPage Virtual Server Configuration Port Forwarding Application Rules QoS Engine Enable Traffic Traffic ShapingClassification Network Filters Access Control Access Control Wizard Access Control Wizard Add Website Select Allow or Deny Filtering Rule Website FiltersInbound Filters Firewall Settings Application Level Gateway Configuration Routing Advanced Wireless Settings Default Wi-Fi Protected SetupDevice Wizard Inbound Filter Advanced Network SettingsUPnP Administrator Settings Time Settings Check this box to send the router logs to a SysLog Server SysLogEnable Email Notification From Email Address Email SettingsAccount Name Password On Log Full On Schedule Smtp Server AddressFile name for the settings System SettingsUpdate Firmware Ddns System Check Schedules Device Information Save Log Apply Log Settings RefreshLog Stats Internet Sessions Page Wireless Support What is WPA? Wireless SecurityLaunch Wireless Security Setup Wizard Wireless Security Setup WizardIf you selected Manually, the following screen will appear Add Wireless Device with WPS Wizard Configure WPA-Personal PSK Configure WPA-Enterprise Radius Security Using Windows Vista Connect to a Wireless NetworkConfigure Wireless Security Security Connect Using WCN 2.0 in Windows Vista Using Windows XP Configure WPA-PSK Connecting to a Wireless Network Why can’t I access the web-based configuration utility? TroubleshootingWhat can I do if I forgot my password? Troubleshooting Troubleshooting Wireless Basics Wireless Personal Area Network Wpan Wireless Local Area Network WlanSmall Office and Home Office HomeSecurity Centralize your router or Access PointEliminate Interference Wireless Modes Check your IP address Networking BasicsStep Highlight Internet Protocol TCP/IP and click Properties StepWireless Signal Rates1 Ieee 802.11n draft 2.0 HT20/HT40 Technical SpecificationsFCC Caution CE Mark WarningFCC Statement IC Radiation Exposure Statement IC statement