Section 3 - Configuration
DHCP Server Settings
DHCP stands for Dynamic Host Control Protocol. The
Enable DHCP Check this box to enable the DHCP server on your
Server: router. Uncheck to disable this function.
DHCP IP Address Enter the starting and ending IP addresses for the
Range: DHCP server’s IP assignment.
Note: If you statically (manually) assign IP addresses to your computers or devices, make sure the IP addresses are outside of this range or you may have an IP conflict.
DHCP Lease The length of time for the IP address lease. Enter the
Time: Lease time in minutes.
Always Enable this feature to broadcast your networks DHCP
Broadcast: server to LAN/WLAN clients.
NetBIOS NetBIOS allows LAN hosts to discover all other Announcement: computers within the network, enable this feature to allow the DHCP Server to offer NetBIOS configuration
settings.
Learn NetBIOS Enable this feature to allow WINS information to be from WAN: learned from the WAN side, disable to allow manual
configuration.
32 |