D-Link DIR-68 manual Advanced Network Settings, UPnP, Inbound Filter

Page 54

Section 3 - Configuration

Advanced Network Settings

UPnP:

WAN Ping:

Inbound Filter:

WAN Port Speed:

Multicast streams:

To use the Universal Plug and Play (UPnP™) feature check the Enabled UPnP box. UPNP provides compatibility with networking equipment, software and peripherals.

Unchecking the box will not allow the DIR-628 to respond to pings. Blocking the Ping may provide some extra security from hackers. Check the box to allow the WAN port to be “pinged”.

This section will list any rules that are created. You may click the Edit icon to change the settings or enable/ disable the rule, or click the Delete icon to remove the rule.

You may set the port speed of the Internet port to 10Mbps, 100Mbps, or auto. Some older cable or DSL modems may require you to set the port speed to 10Mbps.

Check the box to allow multicast traffic to pass through the router from the Internet.

D-Link DIR-628 User Manual

54

Image 54

Contents Page Preface Manual RevisionsTrademarks Table of Contents Technical Specifications Wireless SecurityTroubleshooting Wireless Basics Networking BasicsProductPackageOverviewContents System Requirements Browser RequirementsIntroduction Total PerformanceFeatures Hardware Overview ConnectionsLEDs WCN LEDInstallation Before you BeginWireless Installation Considerations Connect to Cable/DSL/Satellite Modem Turn on your computerConnect to Another Router Installation Getting Started Configuration Web-based Configuration UtilitySetup Wizard Click Internet Connection Setup Wizard to beginConfiguration Configuration Configuration Manual Configuration Dynamic CableInternet Setup ConnectionPptp Page L2TP Page Static assigned by ISP Wireless Settings Mode 2.4GHzChannel Scan Network Settings IP Address Subnet Mask Device NameDhcp Server Settings Type Secondary Wins IP AddressDhcp Reservation ClientsPage Virtual Server Configuration Port Forwarding Application Rules Enable Traffic Traffic Shaping QoS EngineClassification Network Filters Access Control Access Control Wizard Access Control Wizard Website Filters Add Website Select Allow or Deny Filtering RuleInbound Filters Firewall Settings Application Level Gateway Configuration Routing Advanced Wireless Settings Wi-Fi Protected Setup DefaultDevice Wizard Advanced Network Settings UPnPInbound Filter Administrator Settings Time Settings SysLog Check this box to send the router logs to a SysLog ServerAccount Name Password On Log Full On Schedule Email SettingsEnable Email Notification From Email Address Smtp Server AddressSystem Settings File name for the settingsUpdate Firmware Ddns System Check Schedules Device Information Apply Log Settings Refresh LogSave Log Stats Internet Sessions Page Wireless Support Wireless Security What is WPA?Wireless Security Setup Wizard Launch Wireless Security Setup WizardIf you selected Manually, the following screen will appear Add Wireless Device with WPS Wizard Configure WPA-Personal PSK Configure WPA-Enterprise Radius Security Connect to a Wireless Network Using Windows VistaConfigure Wireless Security Security Connect Using WCN 2.0 in Windows Vista Using Windows XP Configure WPA-PSK Connecting to a Wireless Network Troubleshooting Why can’t I access the web-based configuration utility?What can I do if I forgot my password? Troubleshooting Troubleshooting Wireless Basics Wireless Local Area Network Wlan Wireless Personal Area Network WpanHome Small Office and Home OfficeCentralize your router or Access Point Eliminate InterferenceSecurity Wireless Modes Networking Basics Check your IP addressStep Step Highlight Internet Protocol TCP/IP and click PropertiesTechnical Specifications Wireless Signal Rates1 Ieee 802.11n draft 2.0 HT20/HT40CE Mark Warning FCC StatementFCC Caution IC statement IC Radiation Exposure Statement