D-Link DI-714 user manual Host Name Enter the host name provided by the ISP

Page 21

Host Name: Enter the host name provided by the ISP.

NOTE !

Some ISPs, especially cable modem providers, use the “Host Name” to authenticate the user. If this is the case, you will need to enter:

Host Name: Enter the host name provided by the ISP.

Some ISPs require the user to input the MAC address of the original Ethernet adapter. If this is the case, enter:

MAC Address: Enter the MAC address of the Ethernet adapter.

Some ISPs may recognize your LAN card MAC address as a legal user; In this case, you have to copy the LAN card MAC address in the MAC address field. For WIN 95/98 you can run winipcfg to see the LAN card MAC address

For WIN 2000/NT you can run ipconfig /all to see the LAN card MAC address

21

Image 21

Contents Wireless Broadband Router User’s Manual D-LinkDI-714 Hardware Installation Basic DI-714 Configuration & Main PageContents Troubleshooting Advanced SettingsTechnical Specifications Limited WarrantyRegistration Introduction Package Contents Introduction to Firewalls Introduction to Broadband Router TechnologyIntroduction to Local Area Networking Point-to-Point Tunneling Protocol PPTP Introduction to Virtual Private NetworkingIntroduction to Wireless Networking IP Security IPSecStandards Based Technology Installation Considerations Placement Hardware InstallationSafety Precautions device will violate the products warrantyRESET POWERFront Panel Rear PanelStart-up and Log in Basic DI-714 Configuration & Main PagePage Main Page Setup WizardTime Settings Device IP Settings Device IP AddressDevice IP Subnet Mask Enter the IP address that is assigned by your ISP Cable/DSL ISP SettingsEnter the IP subnet mask Enter the ISP gateway address Enter the DNS IP addressISP Additional Settings Password Enter the password of your ISP accountUser name Enter the user name of your ISP account MAC Address Enter the MAC address of the Ethernet adapter Host Name Enter the host name provided by the ISPModem Settings Device Information Device Status This means that there is a connectionThis means that there is not a connection Basic Setup Page DHCP Server Settings Advanced SettingsVirtual Server Settings Page Static Routing Dynamic Settings Modem String Settings Password Settings System Tools Intruder Detection LogIntruder Detection Log View detection logs Display Routing Table Gateway IP Address The IP Address of the assigned Gateway Type The type of routing protocol usedSystem Diagnostics Load Default Settings Upgrade Firmware Reset Device Basic Functions TroubleshootingMy Broadband Router will not turn on. No LED’s light up Make sure that the power switch is set to “On”Sometimes my Broadband Router stops working or locks up The Link or Act LED’s do not turn onI can’t access my Broadband Router LAN Connection ProblemsI can’t connect to other computers on my LAN I can access the Broadband Router, but I can’t connect to my ISP ISP Connection ProblemsMy online game does not work Internet Application ProblemsWireless Troubleshooting Can’t access the Broadband Router from a wireless network cardMy E-Mail program doesn’t receive my E-Mail 3. Click on Load Default Settings Performing a Factory ResetUsing the PING Utility in Windows 95/98/Me The screen shown below is an example of an unsuccessful PING C\ping PING, your connection is not completePinging 192.168.0.1 with 32 bytes of data Request timed out Request timed out Request timed out Request timed outD-Link DFE-530TX PCI Fast Eth Using the WINIPCFG Utility in Windows 95/98/MeClick on More Info to display additional IP information Standards Technical SpecificationsProtocols Supported ManagementTech Support for customers within the United States Technical SupportTech Support for customers within Canada D-Link Technical Support over the Telephone 877Hardware excluding power supplies and fans One 1 year Page Reorient or relocate the receiving antenna