D-Link DI-714 user manual Upgrade Firmware

Page 39

Upgrade Firmware

Upgrade Firmware

The Upgrade Firmware screen enables you to update the firmware used in the DI-714. Visit D-Link’s product support site (www.dlink.com) to download an updated firmware. Firmware updates usually fix problems encountered by users, and may incorporate new features.

Begin by clicking the “Browse…” button to browse your computer to select the updated firmware file. Once the firmware file is selected, click the “Start” button to upgrade the firmware.

Note: When upgrading the firmware, do not try to access the Internet and do not turn the power off. Doing so may cause the firmware upgrade process to abort, which may result in corrupting the firmware in your device.

39

Image 39

Contents Wireless Broadband Router User’s Manual D-LinkDI-714 Hardware Installation Basic DI-714 Configuration & Main PageContents Limited Warranty Advanced SettingsTroubleshooting Technical SpecificationsRegistration Introduction Package Contents Introduction to Firewalls Introduction to Broadband Router TechnologyIntroduction to Local Area Networking Point-to-Point Tunneling Protocol PPTP Introduction to Virtual Private NetworkingIntroduction to Wireless Networking IP Security IPSecStandards Based Technology Installation Considerations device will violate the products warranty Hardware InstallationPlacement Safety PrecautionsRear Panel POWERRESET Front PanelStart-up and Log in Basic DI-714 Configuration & Main PagePage Main Page Setup WizardTime Settings Device IP Settings Device IP AddressDevice IP Subnet Mask Enter the DNS IP address Cable/DSL ISP SettingsEnter the IP address that is assigned by your ISP Enter the IP subnet mask Enter the ISP gateway addressISP Additional Settings Password Enter the password of your ISP accountUser name Enter the user name of your ISP account MAC Address Enter the MAC address of the Ethernet adapter Host Name Enter the host name provided by the ISPModem Settings Device Information Device Status This means that there is a connectionThis means that there is not a connection Basic Setup Page DHCP Server Settings Advanced SettingsVirtual Server Settings Page Static Routing Dynamic Settings Modem String Settings Password Settings System Tools Intruder Detection LogIntruder Detection Log View detection logs Display Routing Table Gateway IP Address The IP Address of the assigned Gateway Type The type of routing protocol usedSystem Diagnostics Load Default Settings Upgrade Firmware Reset Device Make sure that the power switch is set to “On” TroubleshootingBasic Functions My Broadband Router will not turn on. No LED’s light upSometimes my Broadband Router stops working or locks up The Link or Act LED’s do not turn onI can’t access my Broadband Router LAN Connection ProblemsI can’t connect to other computers on my LAN I can access the Broadband Router, but I can’t connect to my ISP ISP Connection ProblemsMy online game does not work Internet Application ProblemsWireless Troubleshooting Can’t access the Broadband Router from a wireless network cardMy E-Mail program doesn’t receive my E-Mail 3. Click on Load Default Settings Performing a Factory ResetUsing the PING Utility in Windows 95/98/Me Request timed out Request timed out Request timed out PING, your connection is not completeThe screen shown below is an example of an unsuccessful PING C\ping Pinging 192.168.0.1 with 32 bytes of data Request timed outD-Link DFE-530TX PCI Fast Eth Using the WINIPCFG Utility in Windows 95/98/MeClick on More Info to display additional IP information Management Technical SpecificationsStandards Protocols SupportedD-Link Technical Support over the Telephone 877 Technical SupportTech Support for customers within the United States Tech Support for customers within CanadaHardware excluding power supplies and fans One 1 year Page Reorient or relocate the receiving antenna