D-Link DI-714 user manual Click on More Info to display additional IP information

Page 52

Click on "More Info" to display additional IP information.

Renew buttons to receive the correct settings. If you manually set your network settings, make sure that the IP Address of your Broadband Router is set in the Gateway portion of the TCP/IP settings in your network settings.

Click on "More Info" to display additional IP information.

D-Link DFE-530TX PCI Fast E

The important settings to watch for in this screen are in the Host Information box. Make sure that the DNS Servers box has the correct DNS information.

Also check the DHCP server box to make sure that you are connected to the right DHCP server.

52

Image 52

Contents D-Link Wireless Broadband Router User’s ManualDI-714 Basic DI-714 Configuration & Main Page Hardware InstallationContents Advanced Settings TroubleshootingTechnical Specifications Limited WarrantyRegistration Introduction Package Contents Introduction to Broadband Router Technology Introduction to FirewallsIntroduction to Local Area Networking Introduction to Virtual Private Networking Point-to-Point Tunneling Protocol PPTPIP Security IPSec Introduction to Wireless NetworkingStandards Based Technology Installation Considerations Hardware Installation PlacementSafety Precautions device will violate the products warrantyPOWER RESETFront Panel Rear PanelBasic DI-714 Configuration & Main Page Start-up and Log inPage Setup Wizard Main PageTime Settings Device IP Address Device IP SettingsDevice IP Subnet Mask Cable/DSL ISP Settings Enter the IP address that is assigned by your ISPEnter the IP subnet mask Enter the ISP gateway address Enter the DNS IP addressPassword Enter the password of your ISP account ISP Additional SettingsUser name Enter the user name of your ISP account Host Name Enter the host name provided by the ISP MAC Address Enter the MAC address of the Ethernet adapterModem Settings Device Information This means that there is a connection Device StatusThis means that there is not a connection Basic Setup Page Advanced Settings DHCP Server SettingsVirtual Server Settings Page Static Routing Dynamic Settings Modem String Settings Password Settings Intruder Detection Log System ToolsIntruder Detection Log View detection logs Display Routing Table Type The type of routing protocol used Gateway IP Address The IP Address of the assigned GatewaySystem Diagnostics Load Default Settings Upgrade Firmware Reset Device Troubleshooting Basic FunctionsMy Broadband Router will not turn on. No LED’s light up Make sure that the power switch is set to “On”The Link or Act LED’s do not turn on Sometimes my Broadband Router stops working or locks upLAN Connection Problems I can’t access my Broadband RouterI can’t connect to other computers on my LAN ISP Connection Problems I can access the Broadband Router, but I can’t connect to my ISPInternet Application Problems My online game does not workCan’t access the Broadband Router from a wireless network card Wireless TroubleshootingMy E-Mail program doesn’t receive my E-Mail Performing a Factory Reset 3. Click on Load Default SettingsUsing the PING Utility in Windows 95/98/Me PING, your connection is not complete The screen shown below is an example of an unsuccessful PING C\pingPinging 192.168.0.1 with 32 bytes of data Request timed out Request timed out Request timed out Request timed outUsing the WINIPCFG Utility in Windows 95/98/Me D-Link DFE-530TX PCI Fast EthClick on More Info to display additional IP information Technical Specifications StandardsProtocols Supported ManagementTechnical Support Tech Support for customers within the United StatesTech Support for customers within Canada D-Link Technical Support over the Telephone 877Hardware excluding power supplies and fans One 1 year Page Reorient or relocate the receiving antenna