D-Link DI-714 user manual

Page 56

Submitting A Claim: The customer shall return the product to the original purchase point based on its return policy. In case the return policy period has expired and the product is within warranty, the customer shall submit a claim to D-Link as outlined below:

The customer must submit with the product as part of the claim a written description of the Hardware defect or Software nonconformance in sufficient detail to allow D-Link to confirm the same, along with proof of purchase of the product (such as a copy of the dated purchase invoice for the product) if the product is not registered.

The customer must obtain a Case ID Number from D-Link Technical Support at 1-877-453-5465, who will attempt to assist the customer in resolving any suspected defects with the product. If the product is considered defective, the customer must obtain a Return Material Authorization (“RMA”) number by completing the RMA form and entering the assigned Case ID Number at https://rma.dlink.com/.

After an RMA number is issued, the defective product must be packaged securely in the original or other suitable shipping package to ensure that it will not be damaged in transit, and the RMA number must be prominently marked on the outside of the package. Do not include any manuals or accessories in the shipping package. D-Link will only replace the defective portion of the product and will not ship back any accessories.

The customer is responsible for all in-bound shipping charges to D-Link. No Cash on Delivery (“COD”) is allowed. Products sent COD will either be rejected by D-Link or become the property of D-Link. Products shall be fully insured by the customer and shipped to D-Link Systems, Inc., 17595 Mt. Herrmann, Fountain Valley, CA 92708. D-Link will not be held responsible for any packages that are lost in transit to D-Link. The repaired or replaced packages will be shipped to the customer via UPS Ground or any common carrier selected by D-Link. Return shipping charges shall be prepaid by D-Link if you use an address in the United States, otherwise we will ship the product to you freight collect. Expedited shipping is available upon request and provided shipping charges are prepaid by the customer.

D-Link may reject or return any product that is not packaged and shipped in strict compliance with the foregoing requirements, or for which an RMA number is not visible from the outside of the package. The product owner agrees to pay D-Link’s reasonable handling and return shipping charges for any product that is not packaged and shipped in accordance with the foregoing requirements, or that is determined by D-Link not to be defective or non-conforming.

What Is Not Covered: The Limited Warranty provided herein by D-Link does not cover: Products that, in D-Link’s judgment, have been subjected to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty installation, lack of reasonable care, repair or service in any way that is not contemplated in the documentation for the product, or if the model or serial number has been altered, tampered with, defaced or removed; Initial installation, installation and removal of the product for repair, and shipping costs; Operational adjustments covered in the operating manual for the product, and normal maintenance; Damage that occurs in shipment, due to act of God, failures due to power surge, and cosmetic damage; Any hardware, software, firmware or other products or services provided by anyone other than D-Link; and Products that have been purchased from inventory clearance or liquidation sales or other sales in which D-Link, the sellers, or the liquidators expressly disclaim their warranty obligation pertaining to the product. While necessary maintenance or repairs on your Product can be performed by any company, we recommend that you use only an Authorized D-Link Service Office. Improper or incorrectly performed maintenance or repair voids this Limited Warranty.

Disclaimer of Other Warranties: EXCEPT FOR THE LIMITED WARRANTY SPECIFIED HEREIN, THE PRODUCT IS PROVIDED “AS-IS” WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IF ANY IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY TERRITORY WHERE A PRODUCT IS SOLD, THE DURATION OF SUCH IMPLIED WARRANTY SHALL BE LIMITED TO THE DURATION OF THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE. EXCEPT AS EXPRESSLY COVERED UNDER THE LIMITED WARRANTY PROVIDED HEREIN, THE ENTIRE RISK AS TO THE QUALITY, SELECTION AND PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT.

Image 56
Contents DI-714 Wireless Broadband Router User’s ManualD-Link Contents Hardware InstallationBasic DI-714 Configuration & Main Page Advanced Settings TroubleshootingTechnical Specifications Limited WarrantyRegistration Introduction Package Contents Introduction to Broadband Router Technology Introduction to FirewallsIntroduction to Local Area Networking Introduction to Virtual Private Networking Point-to-Point Tunneling Protocol PPTPStandards Based Technology Introduction to Wireless NetworkingIP Security IPSec Installation Considerations Hardware Installation PlacementSafety Precautions device will violate the products warrantyPOWER RESETFront Panel Rear PanelBasic DI-714 Configuration & Main Page Start-up and Log inPage Setup Wizard Main PageTime Settings Device IP Subnet Mask Device IP SettingsDevice IP Address Cable/DSL ISP Settings Enter the IP address that is assigned by your ISPEnter the IP subnet mask Enter the ISP gateway address Enter the DNS IP addressUser name Enter the user name of your ISP account ISP Additional SettingsPassword Enter the password of your ISP account Host Name Enter the host name provided by the ISP MAC Address Enter the MAC address of the Ethernet adapterModem Settings Device Information This means that there is not a connection Device StatusThis means that there is a connection Basic Setup Page Advanced Settings DHCP Server SettingsVirtual Server Settings Page Static Routing Dynamic Settings Modem String Settings Password Settings Intruder Detection Log View detection logs System ToolsIntruder Detection Log Display Routing Table Type The type of routing protocol used Gateway IP Address The IP Address of the assigned GatewaySystem Diagnostics Load Default Settings Upgrade Firmware Reset Device Troubleshooting Basic FunctionsMy Broadband Router will not turn on. No LED’s light up Make sure that the power switch is set to “On”The Link or Act LED’s do not turn on Sometimes my Broadband Router stops working or locks upLAN Connection Problems I can’t access my Broadband RouterI can’t connect to other computers on my LAN ISP Connection Problems I can access the Broadband Router, but I can’t connect to my ISPInternet Application Problems My online game does not workMy E-Mail program doesn’t receive my E-Mail Wireless TroubleshootingCan’t access the Broadband Router from a wireless network card Performing a Factory Reset 3. Click on Load Default SettingsUsing the PING Utility in Windows 95/98/Me PING, your connection is not complete The screen shown below is an example of an unsuccessful PING C\pingPinging 192.168.0.1 with 32 bytes of data Request timed out Request timed out Request timed out Request timed outUsing the WINIPCFG Utility in Windows 95/98/Me D-Link DFE-530TX PCI Fast EthClick on More Info to display additional IP information Technical Specifications StandardsProtocols Supported ManagementTechnical Support Tech Support for customers within the United StatesTech Support for customers within Canada D-Link Technical Support over the Telephone 877Hardware excluding power supplies and fans One 1 year Page Reorient or relocate the receiving antenna