D-Link DI-714 user manual Modem Settings

Page 22

Modem Settings

Modem Settings

An analog external modem can be used as a dialup backup to the DSL/Cable connection. If you would like to use a modem backup, you need to enable the modem settings function. Click on “Modem Settings” on the left hand side and input the ISP account settings.

Note: If you change the baud rate settings, please check the initial string. (Please refer to the modem’s manual.)

22

Image 22

Contents D-Link Wireless Broadband Router User’s ManualDI-714 Basic DI-714 Configuration & Main Page Hardware InstallationContents Technical Specifications Advanced SettingsTroubleshooting Limited WarrantyRegistration Introduction Package Contents Introduction to Broadband Router Technology Introduction to FirewallsIntroduction to Local Area Networking Introduction to Virtual Private Networking Point-to-Point Tunneling Protocol PPTPIP Security IPSec Introduction to Wireless NetworkingStandards Based Technology Installation Considerations Safety Precautions Hardware InstallationPlacement device will violate the products warrantyFront Panel POWERRESET Rear PanelBasic DI-714 Configuration & Main Page Start-up and Log inPage Setup Wizard Main PageTime Settings Device IP Address Device IP SettingsDevice IP Subnet Mask Enter the IP subnet mask Enter the ISP gateway address Cable/DSL ISP SettingsEnter the IP address that is assigned by your ISP Enter the DNS IP addressPassword Enter the password of your ISP account ISP Additional SettingsUser name Enter the user name of your ISP account Host Name Enter the host name provided by the ISP MAC Address Enter the MAC address of the Ethernet adapterModem Settings Device Information This means that there is a connection Device StatusThis means that there is not a connection Basic Setup Page Advanced Settings DHCP Server SettingsVirtual Server Settings Page Static Routing Dynamic Settings Modem String Settings Password Settings Intruder Detection Log System ToolsIntruder Detection Log View detection logs Display Routing Table Type The type of routing protocol used Gateway IP Address The IP Address of the assigned GatewaySystem Diagnostics Load Default Settings Upgrade Firmware Reset Device My Broadband Router will not turn on. No LED’s light up TroubleshootingBasic Functions Make sure that the power switch is set to “On”The Link or Act LED’s do not turn on Sometimes my Broadband Router stops working or locks upLAN Connection Problems I can’t access my Broadband RouterI can’t connect to other computers on my LAN ISP Connection Problems I can access the Broadband Router, but I can’t connect to my ISPInternet Application Problems My online game does not workCan’t access the Broadband Router from a wireless network card Wireless TroubleshootingMy E-Mail program doesn’t receive my E-Mail Performing a Factory Reset 3. Click on Load Default SettingsUsing the PING Utility in Windows 95/98/Me Pinging 192.168.0.1 with 32 bytes of data Request timed out PING, your connection is not completeThe screen shown below is an example of an unsuccessful PING C\ping Request timed out Request timed out Request timed outUsing the WINIPCFG Utility in Windows 95/98/Me D-Link DFE-530TX PCI Fast EthClick on More Info to display additional IP information Protocols Supported Technical SpecificationsStandards ManagementTech Support for customers within Canada Technical SupportTech Support for customers within the United States D-Link Technical Support over the Telephone 877Hardware excluding power supplies and fans One 1 year Page Reorient or relocate the receiving antenna