D-Link DI-714 user manual Device Information

Page 23

Device Information

Device Information

The Device Information screen displays the basic information of your DI-714. The Device Name is the same as the Computer Name that was set in the Setup Wizard.

The IP Address is the IP Address assigned to LAN side of your DI-714.

The Private LAN MAC Address the MAC Address assigned to the LAN side of your DI-714.

The Public WAN (Cable/DSL) MAC Address is the MAC Address assigned to the WAN port of the DI-714. This MAC Address may be used by some cable modem connections. The Firmware Version is the current firmware version used by the DI-714.

23

Image 23

Contents DI-714 Wireless Broadband Router User’s ManualD-Link Contents Hardware InstallationBasic DI-714 Configuration & Main Page Limited Warranty Advanced SettingsTroubleshooting Technical SpecificationsRegistration Introduction Package Contents Introduction to Firewalls Introduction to Broadband Router TechnologyIntroduction to Local Area Networking Point-to-Point Tunneling Protocol PPTP Introduction to Virtual Private NetworkingStandards Based Technology Introduction to Wireless NetworkingIP Security IPSec Installation Considerations device will violate the products warranty Hardware InstallationPlacement Safety PrecautionsRear Panel POWERRESET Front PanelStart-up and Log in Basic DI-714 Configuration & Main PagePage Main Page Setup WizardTime Settings Device IP Subnet Mask Device IP SettingsDevice IP Address Enter the DNS IP address Cable/DSL ISP SettingsEnter the IP address that is assigned by your ISP Enter the IP subnet mask Enter the ISP gateway addressUser name Enter the user name of your ISP account ISP Additional SettingsPassword Enter the password of your ISP account MAC Address Enter the MAC address of the Ethernet adapter Host Name Enter the host name provided by the ISPModem Settings Device Information This means that there is not a connection Device StatusThis means that there is a connection Basic Setup Page DHCP Server Settings Advanced SettingsVirtual Server Settings Page Static Routing Dynamic Settings Modem String Settings Password Settings Intruder Detection Log View detection logs System ToolsIntruder Detection Log Display Routing Table Gateway IP Address The IP Address of the assigned Gateway Type The type of routing protocol usedSystem Diagnostics Load Default Settings Upgrade Firmware Reset Device Make sure that the power switch is set to “On” TroubleshootingBasic Functions My Broadband Router will not turn on. No LED’s light upSometimes my Broadband Router stops working or locks up The Link or Act LED’s do not turn onI can’t access my Broadband Router LAN Connection ProblemsI can’t connect to other computers on my LAN I can access the Broadband Router, but I can’t connect to my ISP ISP Connection ProblemsMy online game does not work Internet Application ProblemsMy E-Mail program doesn’t receive my E-Mail Wireless TroubleshootingCan’t access the Broadband Router from a wireless network card 3. Click on Load Default Settings Performing a Factory ResetUsing the PING Utility in Windows 95/98/Me Request timed out Request timed out Request timed out PING, your connection is not completeThe screen shown below is an example of an unsuccessful PING C\ping Pinging 192.168.0.1 with 32 bytes of data Request timed outD-Link DFE-530TX PCI Fast Eth Using the WINIPCFG Utility in Windows 95/98/MeClick on More Info to display additional IP information Management Technical SpecificationsStandards Protocols SupportedD-Link Technical Support over the Telephone 877 Technical SupportTech Support for customers within the United States Tech Support for customers within CanadaHardware excluding power supplies and fans One 1 year Page Reorient or relocate the receiving antenna