NETGEAR EX2700 user manual Install Your Extender

Page 10

N300 WiFi Range Extender

5.In the Name field, type a name (SSID) for your new extender WiFi network and click the Continue button.

Note: You can use the same security settings as your existing network by selecting the check box.

The settings are applied and the following screen displays:

6.Use a WiFi network manager on the computer or mobile device to connect to the extender’s newly created WiFi network.

7.Enter your password.

8.Select the check box and click the Continue button.

Install Your Extender

10

Image 10

Contents N300 WiFi Range Extender Compliance SupportTrademarks Contents Get to Know Your Extender Meet Your Extender LEDsWhen to Use Your Extender How the Extender WorksInstall Your Extender  To place the extender and apply power Place the Extender and Apply PowerConnect to an Existing WiFi Network  To connect with WPSConnect with Netgear genie Smart Setup  To connect with the browser-based Smart SetupInstall Your Extender Cable a Computer or Device to the Ethernet Port Extender WiFi Performance To cable a computer to the extender Ethernet port  To cable a device to the extender Ethernet port Settings  To log in to the extender after the initial setup Log In to the Extender After Initial SetupChange the admin Password  To change the password for the extenderSelect Maintenance Set Password Use the Setup Wizard to Connect the Extender to a NetworkSelect Setup Wizard Manage the Extender Network and Settings Add a WPS Client to the Extender Network View or Change Wireless Settings To view or change the wireless settings  To add a WPS clientSelect Setup Wireless Settings View or Change Advanced Wireless Settings To view or change the advanced wireless settings Set Up a Wireless Access List Select Advanced Wireless Settings To set up and enable the access list Select Setup IP Address Setup Set Up the Extender to Use a Static IP Address To specify a static IP address Monitor and Maintain the Extender  To back up the extender configuration settings Back Up the Extender ConfigurationRestore Saved Configuration Settings Select Maintenance Backup SettingsReturn the Extender to Its Factory Settings Use the Factory Reset Button to Restore Factory Settings To restore factory settings  To erase the extender’s current settingsUpgrade the Firmware Select Maintenance Firmware Upgrade View Wired and Wireless Network Devices To view devices on the network Select Maintenance Network Devices FAQs and Troubleshooting FAQs Cannot Log In to the Extender  To use the extender with a MAC filter on the routerCannot Join the Extender WiFi Network Connection was not established to the selected networkSupplemental Information Factory Default Settings Technical SpecificationsN300 WiFi Range Extender Technical specifications

Related manuals

Manual 16 pages 43.72 Kb