NETGEAR EX2700 user manual Factory Default Settings, Technical Specifications

Page 34

N300 WiFi Range Extender

Factory Default Settings

The following table includes the factory settings for the extender. You can use the Factory Reset button or the Erase feature to return the extender to these settings. (See Return the Extender to Its Factory Settings on page 24.)

Table 3. Factory Settings

Feature	Setting

Setup Wizard	Enabled

Wireless communication	Enabled

Wireless network names (SSID)s	NETGEAR_EXT

Security	Disabled

Transmission speed	Auto1
Country/region	Varies by region

Operating mode	802.11n, 802.11g, 802.11b

Data rate	Up to 300 Mbps

DHCP	Client enabled

1.Maximum wireless signal rate (IEEE Standard 802.11). Actual throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate.

Technical Specifications

The following table includes the product specifications.

Table 4. Technical specifications

Extender Specifications

Network protocol and standards	Data and routing protocols: TCP/IP, DHCP server and client, DNS relay
compatibility

Power consumption	100–240V ~0.1 A, 50-š0 Hz

Physical specifications	•	Dimensions: 67 x 55 x 34 mm (2.64 x 2.17 x 1.34 in.)
	•	Weight: 98 g (3.46 oz)

Supplemental Information

34

Image 34

Contents N300 WiFi Range Extender Compliance SupportTrademarks Contents Get to Know Your Extender Meet Your Extender LEDsWhen to Use Your Extender How the Extender WorksInstall Your Extender  To place the extender and apply power Place the Extender and Apply PowerConnect to an Existing WiFi Network  To connect with WPSConnect with Netgear genie Smart Setup  To connect with the browser-based Smart SetupInstall Your Extender Cable a Computer or Device to the Ethernet Port Extender WiFi Performance To cable a computer to the extender Ethernet port  To cable a device to the extender Ethernet port Settings  To log in to the extender after the initial setup Log In to the Extender After Initial SetupChange the admin Password  To change the password for the extenderSelect Maintenance Set Password Use the Setup Wizard to Connect the Extender to a NetworkSelect Setup Wizard Manage the Extender Network and Settings Add a WPS Client to the Extender Network View or Change Wireless Settings To view or change the wireless settings  To add a WPS clientSelect Setup Wireless Settings View or Change Advanced Wireless Settings To view or change the advanced wireless settings Set Up a Wireless Access List Select Advanced Wireless Settings To set up and enable the access list Select Setup IP Address Setup Set Up the Extender to Use a Static IP Address To specify a static IP address Monitor and Maintain the Extender  To back up the extender configuration settings Back Up the Extender ConfigurationRestore Saved Configuration Settings Select Maintenance Backup SettingsReturn the Extender to Its Factory Settings Use the Factory Reset Button to Restore Factory Settings To restore factory settings  To erase the extender’s current settingsUpgrade the Firmware Select Maintenance Firmware Upgrade View Wired and Wireless Network Devices To view devices on the network Select Maintenance Network Devices FAQs and Troubleshooting FAQs Cannot Log In to the Extender  To use the extender with a MAC filter on the routerCannot Join the Extender WiFi Network Connection was not established to the selected networkSupplemental Information Factory Default Settings Technical SpecificationsN300 WiFi Range Extender Technical specifications

Related manuals

Manual 16 pages 43.72 Kb