NETGEAR EX2700  To restore factory settings,  To erase the extender’s current settings

Page 25

N300 WiFi Range Extender

To restore factory settings:

1.Insert a paper clip into the Factory Reset hole and hold it until the Power LED blinks amber.

Factory Reset button

2.Release the button.

All the LEDs turn off for about 3 seconds.

The Power LED lights solid amber for about 30 seconds.

The Power LED lights solid green. The extender returns to its factory settings.

Erase the Extender Settings and Return to Factory Settings

CAUTION:

This process erases any settings that you have configured in the extender.

To erase the extender’s current settings:

1.On your computer, launch a web browser.

2.In the address field of your browser, enter http://www.mywifiext.net.

You are prompted to enter a user name and password. If you do not see the login prompt, make sure to include http:// when you type http://www.mywifiext.net in your browser.

3.Type admin for the user name and type your password.

If you did not personalize your password, type password for the password.

Monitor and Maintain the Extender

25

Image 25

Contents N300 WiFi Range Extender Compliance SupportTrademarks Contents Get to Know Your Extender LEDs Meet Your ExtenderHow the Extender Works When to Use Your ExtenderInstall Your Extender Connect to an Existing WiFi Network Place the Extender and Apply Power To place the extender and apply power  To connect with WPS To connect with the browser-based Smart Setup Connect with Netgear genie Smart SetupInstall Your Extender Cable a Computer or Device to the Ethernet Port Extender WiFi Performance To cable a computer to the extender Ethernet port  To cable a device to the extender Ethernet port Settings Change the admin Password Log In to the Extender After Initial Setup To log in to the extender after the initial setup  To change the password for the extenderSelect Maintenance Set Password Use the Setup Wizard to Connect the Extender to a NetworkSelect Setup Wizard Manage the Extender Network and Settings  To view or change the wireless settings View or Change Wireless SettingsAdd a WPS Client to the Extender Network  To add a WPS clientSelect Setup Wireless Settings View or Change Advanced Wireless Settings To view or change the advanced wireless settings Select Advanced Wireless Settings Set Up a Wireless Access List To set up and enable the access list Select Setup IP Address Setup Set Up the Extender to Use a Static IP Address To specify a static IP address Monitor and Maintain the Extender Restore Saved Configuration Settings Back Up the Extender Configuration To back up the extender configuration settings Select Maintenance Backup SettingsUse the Factory Reset Button to Restore Factory Settings Return the Extender to Its Factory Settings To erase the extender’s current settings  To restore factory settingsUpgrade the Firmware Select Maintenance Firmware Upgrade View Wired and Wireless Network Devices To view devices on the network Select Maintenance Network Devices FAQs and Troubleshooting FAQs  To use the extender with a MAC filter on the router Cannot Log In to the ExtenderConnection was not established to the selected network Cannot Join the Extender WiFi NetworkSupplemental Information Technical Specifications Factory Default SettingsN300 WiFi Range Extender Technical specifications

Related manuals

Manual 16 pages 43.72 Kb