NETGEAR EX2700 user manual Return the Extender to Its Factory Settings

Page 24

N300 WiFi Range Extender

You are prompted to enter a user name and password. If you do not see the login prompt, make sure to include http:// when you type http://www.mywifiext.net in your browser.

3.Type admin for the user name and type your password.

If you did not personalize your password, type password for the password.

4.Select Maintenance > Backup Settings.

5.Click the Browse button.

6.Locate and select the previously saved backup file.

By default, the name of the backup file is NETGEAR_WN3000RP.cfg.

CAUTION:

After you click the Restore button, do not try to go online, turn off the extender, shut down the computer, or do anything else to the extender until it finishes restarting!

7.Click the Restore button.

A confirmation pop-up screen displays.

8.Confirm your decision.

The extender restarts. This process takes about one minute.

Return the Extender to Its Factory Settings

To reset the extender to factory default settings, you can use either the Factory Reset button or the Erase feature. For information about the factory settings, see Factory Default Settings on page 34.

Use the Factory Reset Button to Restore Factory Settings

CAUTION:

This process erases any settings that you configured in the extender.

Monitor and Maintain the Extender

24

Image 24

Contents N300 WiFi Range Extender Support ComplianceTrademarks Contents Get to Know Your Extender Meet Your Extender LEDsWhen to Use Your Extender How the Extender WorksInstall Your Extender Place the Extender and Apply Power Connect to an Existing WiFi Network To place the extender and apply power  To connect with WPSConnect with Netgear genie Smart Setup  To connect with the browser-based Smart SetupInstall Your Extender Extender WiFi Performance Cable a Computer or Device to the Ethernet Port To cable a computer to the extender Ethernet port  To cable a device to the extender Ethernet port Settings Log In to the Extender After Initial Setup Change the admin Password To log in to the extender after the initial setup  To change the password for the extenderUse the Setup Wizard to Connect the Extender to a Network Select Maintenance Set PasswordSelect Setup Wizard Manage the Extender Network and Settings View or Change Wireless Settings  To view or change the wireless settingsAdd a WPS Client to the Extender Network  To add a WPS clientView or Change Advanced Wireless Settings Select Setup Wireless Settings To view or change the advanced wireless settings Set Up a Wireless Access List Select Advanced Wireless Settings To set up and enable the access list Set Up the Extender to Use a Static IP Address Select Setup IP Address Setup To specify a static IP address Monitor and Maintain the Extender Back Up the Extender Configuration Restore Saved Configuration Settings To back up the extender configuration settings Select Maintenance Backup SettingsReturn the Extender to Its Factory Settings Use the Factory Reset Button to Restore Factory Settings To restore factory settings  To erase the extender’s current settingsUpgrade the Firmware View Wired and Wireless Network Devices Select Maintenance Firmware Upgrade To view devices on the network Select Maintenance Network Devices FAQs and Troubleshooting FAQs Cannot Log In to the Extender  To use the extender with a MAC filter on the routerCannot Join the Extender WiFi Network Connection was not established to the selected networkSupplemental Information Factory Default Settings Technical SpecificationsN300 WiFi Range Extender Technical specifications

Related manuals

Manual 16 pages 43.72 Kb