NETGEAR EX2700 Setup: Default Password and Static IP Address Configuration

Page 21

N300 WiFi Range Extender

10.Click the Apply button.

Now only computers and devices in the Wireless Card Access list can join the extender’s WiFi networks.

Set Up the Extender to Use a Static IP Address

By default, the extender gets its IP address dynamically from the router in your network. This is the most common setting and is suitable for most situations. You can set up the extender to use a static IP address. You specify the static IP address and it always stays the same.

Working with a static IP address requires networking knowledge.

To specify a static IP address:

1.On your computer, launch a web browser.

2.In the address field of your browser, enter http://www.mywifiext.net.

You are prompted to enter a user name and password. If you do not see the login prompt, make sure to include http:// when you type http://www.mywifiext.net in your browser.

3.Type admin for the user name and type your password.

If you did not personalize your password, type password for the password.

4.Select Setup > IP Address Setup.

5.Select the Use Static IP Address radio button.

6.Complete the static IP address fields.

7.Click the Apply button. Your settings are saved.

Manage the Extender Network and Settings

21

Image 21
Contents N300 WiFi Range Extender Support ComplianceTrademarks Contents Get to Know Your Extender LEDs Meet Your ExtenderHow the Extender Works When to Use Your ExtenderInstall Your Extender Connect to an Existing WiFi Network Place the Extender and Apply Power To place the extender and apply power  To connect with WPS To connect with the browser-based Smart Setup Connect with Netgear genie Smart SetupInstall Your Extender Extender WiFi Performance Cable a Computer or Device to the Ethernet Port To cable a computer to the extender Ethernet port  To cable a device to the extender Ethernet port Settings Change the admin Password Log In to the Extender After Initial Setup To log in to the extender after the initial setup  To change the password for the extenderUse the Setup Wizard to Connect the Extender to a Network Select Maintenance Set PasswordSelect Setup Wizard Manage the Extender Network and Settings  To view or change the wireless settings View or Change Wireless SettingsAdd a WPS Client to the Extender Network  To add a WPS clientView or Change Advanced Wireless Settings Select Setup Wireless Settings To view or change the advanced wireless settings Select Advanced Wireless Settings Set Up a Wireless Access List To set up and enable the access list Set Up the Extender to Use a Static IP Address Select Setup IP Address Setup To specify a static IP address Monitor and Maintain the Extender Restore Saved Configuration Settings Back Up the Extender Configuration To back up the extender configuration settings Select Maintenance Backup SettingsUse the Factory Reset Button to Restore Factory Settings Return the Extender to Its Factory Settings To erase the extender’s current settings  To restore factory settingsUpgrade the Firmware View Wired and Wireless Network Devices Select Maintenance Firmware Upgrade To view devices on the network Select Maintenance Network Devices FAQs and Troubleshooting FAQs  To use the extender with a MAC filter on the router Cannot Log In to the ExtenderConnection was not established to the selected network Cannot Join the Extender WiFi NetworkSupplemental Information Technical Specifications Factory Default SettingsN300 WiFi Range Extender Technical specifications
Related manuals
Manual 16 pages 43.72 Kb