N300 WiFi Range Extender
Meet Your Extender
LEDs are located on the front panel. Buttons are located on the side panel. The Factory Reset button and an Ethernet port are located on the bottom.
Router Device
Link Link
LED LED
Power LED 
WPS LED
Power On/Off button
WPS button |
|
Factory Reset | Ethernet port |
button |
|
Figure 1. Extender front panel | |
Table 1. LEDs |
|
|
|
LED | Description |
|
|
Router Link LED | The connection between the extender and the router or access point: |
| • Solid green. Best connection. |
| • Solid amber. Good connection. |
| • Solid red. Poor connection. |
| • Off. No connection. |
Device Link LED | The connection between the extender and a computer or mobile device. | ||
|
| • | Solid green. Best connection. |
|
| • | Solid amber. Good connection. |
|
| ||
•Solid red. Poor connection.
•Off. No connection.
Power LED | • | Solid amber. The extender is booting. |
| • | Solid green. The extender is powered on. |
•Off. The extender is powered off.
WPS LED | • | Solid green. WiFi security is enabled (WPA or WPA2). |
| • | Blinking green. A WPS connection is being established. |
•Off. WiFi security is not enabled.
Get to Know Your Extender
5