NETGEAR EX2700 Back Up the Extender Configuration, Restore Saved Configuration Settings

Page 23

N300 WiFi Range Extender

Back Up the Extender Configuration

When the extender works correctly after initial setup, NETGEAR recommends that you back up the extender configuration settings. After you have backed up the settings, if you change the extender settings but are not content with the new settings, you can restore the backed-up configuration settings.

To back up the extender configuration settings:

1.On your computer, launch a web browser.

2.In the address field of your browser, enter http://www.mywifiext.net.

You are prompted to enter a user name and password. If you do not see the login prompt, make sure to include http:// when you type http://www.mywifiext.net in your browser.

3.Type admin for the user name and type your password.

If you did not personalize your password, type password for the password.

4.Select Maintenance > Backup Settings.

5.Click the Backup button.

Your browser extracts the configuration file from the extender.

6.When prompted, leave the Save radio button selected and click the OK button.

7.If your browser is not set up to save downloaded files automatically, locate where you want to save the file.

A copy of the current settings is saved in the location you specified.

Restore Saved Configuration Settings

You can restore the configuration file of the extender to a previously saved configuration file.

To restore the extender configuration settings:

1.On your computer, launch a web browser.

2.In the address field of your browser, enter http://www.mywifiext.net.

Monitor and Maintain the Extender

23

Image 23
Contents N300 WiFi Range Extender Trademarks SupportCompliance Contents Get to Know Your Extender LEDs Meet Your ExtenderHow the Extender Works When to Use Your ExtenderInstall Your Extender  To connect with WPS Place the Extender and Apply PowerConnect to an Existing WiFi Network  To place the extender and apply power To connect with the browser-based Smart Setup Connect with Netgear genie Smart SetupInstall Your Extender  To cable a computer to the extender Ethernet port Extender WiFi PerformanceCable a Computer or Device to the Ethernet Port  To cable a device to the extender Ethernet port Settings  To change the password for the extender Log In to the Extender After Initial SetupChange the admin Password  To log in to the extender after the initial setupSelect Setup Wizard Use the Setup Wizard to Connect the Extender to a NetworkSelect Maintenance Set Password Manage the Extender Network and Settings  To add a WPS client View or Change Wireless Settings To view or change the wireless settings Add a WPS Client to the Extender Network To view or change the advanced wireless settings View or Change Advanced Wireless SettingsSelect Setup Wireless Settings Select Advanced Wireless Settings Set Up a Wireless Access List To set up and enable the access list  To specify a static IP address Set Up the Extender to Use a Static IP AddressSelect Setup IP Address Setup Monitor and Maintain the Extender Select Maintenance Backup Settings Back Up the Extender ConfigurationRestore Saved Configuration Settings  To back up the extender configuration settingsUse the Factory Reset Button to Restore Factory Settings Return the Extender to Its Factory Settings To erase the extender’s current settings  To restore factory settingsUpgrade the Firmware  To view devices on the network View Wired and Wireless Network DevicesSelect Maintenance Firmware Upgrade Select Maintenance Network Devices FAQs and Troubleshooting FAQs  To use the extender with a MAC filter on the router Cannot Log In to the ExtenderConnection was not established to the selected network Cannot Join the Extender WiFi NetworkSupplemental Information Technical Specifications Factory Default SettingsN300 WiFi Range Extender Technical specifications
Related manuals
Manual 16 pages 43.72 Kb