Actiontec electronic V.90 ISA user manual ATI11

Result Codes:

OK	n = 0
CONNECT	n = 1, 3, 6
ERROR	Otherwise

ATI11 Display Diagnostic Information for the last modem connection

The “ATI11” command displays the following diagnostic information for the last modem connection. A value of “NA” will be displayed if that parameter is not appli- cable for that connection.

Table 1. Diagnostic Information

Description	Example	Comments
Last Connection	.34	56K/V.34/V.32 - The last data connection is
		successful. Failure-the last data connection
		failed.
Initial Transmit Carrier Rate	33600	The upload connection rate after initial nego-
		tiation.
Initial Receive Carrier Rate	33600	The download connection rate after initial ne-
		gotiation.
Final Transmit Carrier Rate	33600	The last upload connection rate.
Final Receive Carrier Rate	33600	The last download connection rate.
Protocol Negotiation Result	V.42	Possible results are: V.42, MNP or noEC
Data Compression Result	V.42bis	Possible results are: V.42bis, MNP5 or no
		Compression.
Estimated Noise Level	10	An average of the squared error between the
		received constellation point and the decision
		point.
Receive Signal Power Level	20	Receive signal (-dBm)
Transmit Signal Power Level	10	Transmit signal level ( –dBm)
Round Trip Delay (msec)	60	Measured Round Trip Delay in milliseconds
Near Echo Level (-dBm)	39	Measured Near Echo Level

59