ADTRAN 600R manual System Configsnmp Menu System Configsnmp Menuaccess

Page 25

Total Access 600R User Interface Guide (UIG)

SYSTEM CONFIG>SNMP MENU

SYSTEM CONFIG>SNMP MENU>ACCESS

The Total Access 600R is an SNMP agent. The SNMP Menu parameters set up the manager, communities, and levels. When set to OFF, SNMP access is denied. When set to ON, the 600R will respond to SNMP managers based on the configuration. The factory default is ON.

SYSTEM CONFIG>SNMP MENU>COMMUNITIES

SYSTEM CONFIG>SNMP MENU>COMMUNITIES>NAME

This list is used to set up to 60 SNMP communities names that the 600R will allow. This is a text string for the community name. You can enter up to 31 characters in this field. The factory default is no entry in the name parameter.

SYSTEM CONFIG>SNMP MENU>COMMUNITIES>PRIVILEGE

The access for this manager can be assigned three levels. The factory default is NONE.

NONE

No access is allowed for this community or manager.

GET

Manager can only read items.

GET/SET

Manager can read and set items.

SYSTEM CONFIG>SNMP MENU>COMMUNITIES>MANAGER IP

This is the IP address of the SNMP manager. If set to 0.0.0.0, any SNMP manager can access the Total Access 600R for this community. The factory default is 0.0.0.0.

SYSTEM CONFIG>SNMP MENU>TRAPS

SYSTEM CONFIG>SNMP MENU>TRAPS>MANAGER NAME

The 600R can generate SNMP traps. This list allows up to four managers to be listed to receive traps. MANAGER NAME is the text string describing the name of the entry. It is intended for easy reference and has no bearing on the SNMP trap function. You can enter up to 31 characters in this field. The factory default is no entry in the manager name field.

SYSTEM CONFIG>SNMP MENU>TRAPS>MANAGER IP

This is the IP address of the manager that is to receive the traps. The factory default is 0.0.0.0.

SYSTEM CONFIG>SNMP MENU>FDL

SYSTEM CONFIG>SNMP MENU>FDL>MODE

This enables the FDL (only in ESF mode) to be used for management. Learning mode can also be enabled so the Total Access 600R can “learn” its IP configuration to be used for its FDL management. Once it learns this information from, for example a Total Access 4303, the configuration items populate. The factory default is ON.

SYSTEM CONFIG>SNMP MENU>FDL>LINK IP ADDRESS

This is the local IP address used for the FDL management. The FDL uses a separate IP network for communication, distinct from the customer data configured under the ROUTER menus. The factory default is 0.0.0.0.

64200600L1#T-31A

© 2002, ADTRAN, Inc.

Page 25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Total Access 600R To the Holder of the Manual TrademarksSafety Instructions REN/SOC FIC Usoc Federal Communications Commission FCC Statement Total Access 600R User Interface Guide UIG Affidavit Requirements for Connection to Digital Services Total Access 600R User Interface Guide UIG Total Access 600R User Interface Guide UIG Limited Product Warranty Warranty and Customer ServiceRepair and Return Customer Service, Product Support Information, and TrainingPre-Sales Inquiries and Applications Support Post-Sale Support Installation and Maintenance SupportTraining Table of Contents Total Access 600R User Interface GuideFigures Menu Path Left Pane Terminal Menu WindowStatus Extended Help Navigation Help Tool Tip System TimeWindow Panes Window Pane Navigation Navigating using the Keyboard KeysRight Window Pane Notation Moving through the Menus Configuration Keystrokes Selecting the Appropriate Menu Password Security LevelSecurity Levels Security Level DescriptionSystem Infosystem Name System InfoSystem Infosystem Location System Infosystem ContactSystem Infopart Number System Infobootcode RevisionSystem Infoserial Number System Infofirmware RevisionSystem Configoperating Mode System ConfigSystem CONFIGT1 Timing Mode System Configtelnet AccessSystem Configtelnet User Listpassword System Configtelnet User Listauthen MethodSystem Configtelnet User Listidle Time Mins System Configtelnet User ListlevelSystem Configsnmp Menucommunitiesprivilege System Configsnmp Menu System Configsnmp MenuaccessSystem Configsnmp Menucommunitiesmanager IP System Configsnmp Menutrapsmanager IPSystem Configsnmp Menufdlip Netmask System Configsnmp Menufdlfar END IP AddressSystem Configsnmp Menufdllearn Address System Configsnmp Menufdlaccept ALL SnmpSystem Configmaint Port Menudata Bits System Configmaint Port Menubaud RateSystem Configmaint Port Menuparity System Configmaint Port Menustop BitsSystem Confignetwork Timehost Address System Confignetwork Timeadjust for Daylight SavingSystem Confignetwork Timerefresh System Confignetwork TimestatusSystem Utilityupgrade Firmwaretftp Server Filename System Utilityupgrade Firmwaretftp Server AddressSystem Utilityupgrade Firmwaretransfer Status System Utilityupgrade Firmwarestart TransferSystem Utilityconfig Transfertftp Server IP Address System Utilityconfig Transfertransfer TypeSystem Utilityconfig Transfertftp Server Filename System Utilityconfig Transfercurrent Transfer StatusSystem Utilityping System UTILITYPINGSTART/STOP System Utilityterminal ModeSystem Utilitypinghost Address System Utilitypingsource AddressRouter Menus Routerconfig RouterconfigglobalMode RouterconfigglobalipStatic Routes Dhcp ServerRouterconfigglobalsecurity RouterconfigglobalbridgeAuthentication UDP RelayPPP Radius ServerFilter Defines Hexadecimal format Default isIP address compared to the source address dotted decimal Routerconfigethernetprimary IP RouterconfigethernetRIP Routerconfigethernetmac Address Routerconfigethernetsecondary IPSRouterconfigwan Proxy ARPRouterconfigwanppp Profile ROUTERCONFIGWANL2 ProtocolNAT Total Access 600R User Interface Guide UIG SPECIFIED. Default is PPP peer’s IP address or network can be set here, if known Bridge Fined in the F Ilters /I N E Xceptions list FiltersMaintenance Protocol Routerconfigwanframe RelayPolling Frequency Dlci Mapping 0.0 TCP or UDP Choices are ANY Port and SPECIFIED. Default is ANY Port Bridge Map Filter Becn Timeout msec Maintenance DlciRouterstatus Routerstatussessionppp Session RouterstatussessionRouterstatussessionframe Relay PortRouterstatusarp Cache PVC’sRouterstatusarp Cacheip Address Routerstatusarp Cachemac AddressRouterstatusbridge Table Routerstatusarp CachetimeRouterstatusbridge Tablemac Address Routerstatusbridge TableportRouterstatusip Routeshops Routerstatusip RoutesflagsRouterstatusip Routesttl Routerstatuswan StatsRouterlogs Routerstatusip StatsRouterlogsppp LOG Routerlogssyslog HostModulesmodulesslt Modules Menus ModulesmodulesModulesmodulestype ModulesmodulesmenuModulesmodulesmenuformat ModulesmodulesalarmModulesmodulesmenuline Code ModulesmodulesmenuequalizationModulesmodulestestloc LB ModulesmodulestestModulesmodulestestrem LB Modulesmodulestesttest StatusModulesmodulesstatusslp ModulesmodulesstatuslcvModulesmodulesstatusuas MODULESDS0 MapsMODULESDS0 Mapsmap 2PORT MODULESDS0 Mapsmap 2SLOTDS0 Mapping Instructions Step Action DS0 MappingGlobal IP Setup Setting up Routing OptionsGlobal IP Setup Instructions Step ActionEthernet IP Setup Ethernet IP Setup Instructions Step Action WAN IP Setup PPP IP Setup Instructions WAN IP SetupWAN IP Setup Frame Relay IP Setup Instructions WAN IP Setup IP Routing with NAT Step Action Total Access 600R User Interface Guide UIGWAN Bridging PPP Bridge Setup Instructions Step Action Setting up Bridging OptionsWAN Bridging Frame Relay Bridge Setup Map DLCIs Step Action WAN Bridging PPP Bridge Setup InstructionsTotal Access 600R User Interface Guide UIG

600R specifications

The ADTRAN 600R is a sophisticated router designed to meet the demands of modern telecommunications and networking environments. This device is specifically engineered to support high-speed connectivity and efficient data transmission, making it a preferred choice for service providers and enterprises alike. It integrates advanced features and technologies that enhance performance, scalability, and flexibility.

One of the standout features of the ADTRAN 600R is its robust support for various WAN technologies. It offers versatile connectivity options, including Ethernet, T1, and DS3 interfaces, allowing seamless integration with existing network infrastructures. This adaptability is crucial for organizations looking to upgrade their systems without undergoing a complete overhaul.

In terms of performance, the ADTRAN 600R is equipped with a powerful processor, enabling it to handle high traffic loads efficiently. With support for multiple Gigabit Ethernet and a high-capacity backplane, the router ensures minimal latency and maximizes throughput, making it ideal for bandwidth-intensive applications such as video conferencing, cloud services, and real-time data processing.

The ADTRAN 600R also prioritizes security and reliability. It incorporates advanced security features such as built-in firewalls and virtual private network (VPN) capabilities. These features provide strong protection against cyber threats while facilitating secure remote access for users. The router's high availability and redundancy options, including load balancing and failover capabilities, ensure continuous operation even in the event of hardware failure.

Management and configuration of the ADTRAN 600R are simplified with a user-friendly interface and support for SNMP and CLI management. This ease of use allows network administrators to monitor performance, troubleshoot issues, and implement changes swiftly, enhancing overall network efficiency. Additionally, the router supports Quality of Service (QoS) protocols, ensuring that critical applications receive the appropriate bandwidth and priority.

In conclusion, the ADTRAN 600R is a feature-rich router that combines cutting-edge technology, high performance, and comprehensive security features. Its flexibility in supporting various WAN technologies and management tools makes it an excellent choice for businesses seeking to enhance their networking capabilities. With its ability to deliver reliable and efficient connectivity, the ADTRAN 600R stands out as a strategic asset for any organization aiming to thrive in a data-driven world.
Top Page Image Contents