ADTRAN 600R manual Routerconfigglobalip, Mode, Static Routes, Dhcp Server, Dns

Page 33

Total Access 600R User Interface Guide (UIG)

ROUTER>CONFIG>GLOBAL>IP

This parameter is used for general IP configuration.

Mode

This item controls the GLOBAL option for IP routing. The choices are ON and OFF. The default is ON.

Static Routes

Use this menu to enter static routes to other networks

.

ACTIVE

Adds this static route entry to the IP routing table when set to YES and

 

removes it (if it was previously added) if set to NO. Default is YES.

IP ADDRESS

SUBNET MASK

The IP address of the host or network address of the device being routed to. Default is 0.0.0.0.

Determines the bits in the previous IP address that are used. If this is to be a host route, it must be set to all ones (255.255.255.255). Default is 0.0.0.0.

GATEWAY

The IP address of the router to receive the forwarded IP packet. Default is

 

0.0.0.0.

HOPS

PRIVATE

The number of router hops required to get to the network or host. Maximum distance is 16 hops. Default is 1.

When set to NO, the 600R will advertise this static route using RIP. Setting to YES means that the route is kept private. Default is NO.

DHCP Server

Use this menu to set up the DHCP server.

DHCP MODE

DHCP RENEWAL TIME (HOURS)

When set to ON, the 600R acts as a DHCP server and will dynamically assign IP, network mask, default gateway, and DNS addresses to any device which transmits a broadcast DHCP request. The addresses as- signed are based on the 600R’s own IP address and will be within the same network. Default is OFF.

The number of hours that the DHCP server should allow the device before it is required to send a new DHCP request. The range is 0-255. The default is 15 hours, and 0 represents an infinite lease.

DNS

Enter the 600R's domain name and the DNS servers in this menu.

DOMAIN NAME

SERVER 1

SERVER 2

Text string used to represent the domain name used by the Total Access 600R.

First server to which domain name requests are sent. Default is 0.0.0.0.

Server used as a backup, in case the primary address does not respond to the request. Default is 0.0.0.0.

64200600L1#T-31A

© 2002, ADTRAN, Inc.

Page 33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Total Access 600R To the Holder of the Manual TrademarksSafety Instructions REN/SOC FIC Usoc Federal Communications Commission FCC Statement Total Access 600R User Interface Guide UIG Affidavit Requirements for Connection to Digital Services Total Access 600R User Interface Guide UIG Total Access 600R User Interface Guide UIG Limited Product Warranty Warranty and Customer ServiceCustomer Service, Product Support Information, and Training Repair and ReturnPre-Sales Inquiries and Applications Support Installation and Maintenance Support Post-Sale SupportTraining Table of Contents Total Access 600R User Interface GuideFigures Menu Path Left Pane Terminal Menu WindowStatus Extended Help Navigation Help Tool Tip System TimeWindow Panes Navigating using the Keyboard Keys Window Pane NavigationRight Window Pane Notation Moving through the Menus Configuration Keystrokes Selecting the Appropriate Menu Password Security LevelSecurity Levels Security Level DescriptionSystem Infosystem Name System InfoSystem Infosystem Location System Infosystem ContactSystem Infopart Number System Infobootcode RevisionSystem Infoserial Number System Infofirmware RevisionSystem Configoperating Mode System ConfigSystem CONFIGT1 Timing Mode System Configtelnet AccessSystem Configtelnet User Listpassword System Configtelnet User Listauthen MethodSystem Configtelnet User Listidle Time Mins System Configtelnet User ListlevelSystem Configsnmp Menucommunitiesprivilege System Configsnmp Menu System Configsnmp MenuaccessSystem Configsnmp Menucommunitiesmanager IP System Configsnmp Menutrapsmanager IPSystem Configsnmp Menufdlip Netmask System Configsnmp Menufdlfar END IP AddressSystem Configsnmp Menufdllearn Address System Configsnmp Menufdlaccept ALL SnmpSystem Configmaint Port Menudata Bits System Configmaint Port Menubaud RateSystem Configmaint Port Menuparity System Configmaint Port Menustop BitsSystem Confignetwork Timehost Address System Confignetwork Timeadjust for Daylight SavingSystem Confignetwork Timerefresh System Confignetwork TimestatusSystem Utilityupgrade Firmwaretftp Server Filename System Utilityupgrade Firmwaretftp Server AddressSystem Utilityupgrade Firmwaretransfer Status System Utilityupgrade Firmwarestart TransferSystem Utilityconfig Transfertftp Server IP Address System Utilityconfig Transfertransfer TypeSystem Utilityconfig Transfertftp Server Filename System Utilityconfig Transfercurrent Transfer StatusSystem Utilityping System UTILITYPINGSTART/STOP System Utilityterminal ModeSystem Utilitypinghost Address System Utilitypingsource AddressRouter Menus Routerconfig RouterconfigglobalMode RouterconfigglobalipStatic Routes Dhcp ServerRouterconfigglobalsecurity RouterconfigglobalbridgeAuthentication UDP RelayPPP Radius ServerFilter Defines Hexadecimal format Default isIP address compared to the source address dotted decimal Routerconfigethernet Routerconfigethernetprimary IPRIP Routerconfigethernetmac Address Routerconfigethernetsecondary IPSRouterconfigwan Proxy ARPRouterconfigwanppp Profile ROUTERCONFIGWANL2 ProtocolNAT Total Access 600R User Interface Guide UIG SPECIFIED. Default is PPP peer’s IP address or network can be set here, if known Bridge Fined in the F Ilters /I N E Xceptions list FiltersRouterconfigwanframe Relay Maintenance ProtocolPolling Frequency Dlci Mapping 0.0 TCP or UDP Choices are ANY Port and SPECIFIED. Default is ANY Port Bridge Map Filter Maintenance Dlci Becn Timeout msecRouterstatus Routerstatussessionppp Session RouterstatussessionRouterstatussessionframe Relay PortRouterstatusarp Cache PVC’sRouterstatusarp Cacheip Address Routerstatusarp Cachemac AddressRouterstatusbridge Table Routerstatusarp CachetimeRouterstatusbridge Tablemac Address Routerstatusbridge TableportRouterstatusip Routeshops Routerstatusip RoutesflagsRouterstatusip Routesttl Routerstatuswan StatsRouterlogs Routerstatusip StatsRouterlogsppp LOG Routerlogssyslog HostModulesmodulesslt Modules Menus ModulesmodulesModulesmodulestype ModulesmodulesmenuModulesmodulesmenuformat ModulesmodulesalarmModulesmodulesmenuline Code ModulesmodulesmenuequalizationModulesmodulestestloc LB ModulesmodulestestModulesmodulestestrem LB Modulesmodulestesttest StatusModulesmodulesstatusslp ModulesmodulesstatuslcvModulesmodulesstatusuas MODULESDS0 MapsMODULESDS0 Mapsmap 2PORT MODULESDS0 Mapsmap 2SLOTDS0 Mapping Instructions Step Action DS0 MappingGlobal IP Setup Setting up Routing OptionsGlobal IP Setup Instructions Step ActionEthernet IP Setup Ethernet IP Setup Instructions Step Action WAN IP Setup PPP IP Setup Instructions WAN IP SetupWAN IP Setup Frame Relay IP Setup Instructions WAN IP Setup IP Routing with NAT Step Action Total Access 600R User Interface Guide UIGWAN Bridging PPP Bridge Setup Instructions Step Action Setting up Bridging OptionsWAN Bridging Frame Relay Bridge Setup Map DLCIs Step Action WAN Bridging PPP Bridge Setup InstructionsTotal Access 600R User Interface Guide UIG

600R specifications

The ADTRAN 600R is a sophisticated router designed to meet the demands of modern telecommunications and networking environments. This device is specifically engineered to support high-speed connectivity and efficient data transmission, making it a preferred choice for service providers and enterprises alike. It integrates advanced features and technologies that enhance performance, scalability, and flexibility.

One of the standout features of the ADTRAN 600R is its robust support for various WAN technologies. It offers versatile connectivity options, including Ethernet, T1, and DS3 interfaces, allowing seamless integration with existing network infrastructures. This adaptability is crucial for organizations looking to upgrade their systems without undergoing a complete overhaul.

In terms of performance, the ADTRAN 600R is equipped with a powerful processor, enabling it to handle high traffic loads efficiently. With support for multiple Gigabit Ethernet and a high-capacity backplane, the router ensures minimal latency and maximizes throughput, making it ideal for bandwidth-intensive applications such as video conferencing, cloud services, and real-time data processing.

The ADTRAN 600R also prioritizes security and reliability. It incorporates advanced security features such as built-in firewalls and virtual private network (VPN) capabilities. These features provide strong protection against cyber threats while facilitating secure remote access for users. The router's high availability and redundancy options, including load balancing and failover capabilities, ensure continuous operation even in the event of hardware failure.

Management and configuration of the ADTRAN 600R are simplified with a user-friendly interface and support for SNMP and CLI management. This ease of use allows network administrators to monitor performance, troubleshoot issues, and implement changes swiftly, enhancing overall network efficiency. Additionally, the router supports Quality of Service (QoS) protocols, ensuring that critical applications receive the appropriate bandwidth and priority.

In conclusion, the ADTRAN 600R is a feature-rich router that combines cutting-edge technology, high performance, and comprehensive security features. Its flexibility in supporting various WAN technologies and management tools makes it an excellent choice for businesses seeking to enhance their networking capabilities. With its ability to deliver reliable and efficient connectivity, the ADTRAN 600R stands out as a strategic asset for any organization aiming to thrive in a data-driven world.
Top Page Image Contents