ADTRAN 600R System Configtelnet User Listauthen Method, System Configtelnet User Listpassword

Page 24

Total Access 600R User Interface Guide (UIG)

SYSTEM CONFIG>TELNET USER LIST>AUTHEN METHOD

The user can be authenticated by selecting:

PASSWORD

RADIUS

The factory default is password.

The Password field is used to authenticate the user. The Radius client is used for authenticating the user.

SYSTEM CONFIG>TELNET USER LIST>PASSWORD

When the authenticating method is password, this text string is used for the password. You can enter up to 15 characters in this field. The factory default is no entry in this field.

SYSTEM CONFIG>TELNET USER LIST>IDLE TIME (MINS)

This sets the amount of time in minutes you can be idle before you are automatically logged off. The factory default

is 10 MINUTES. The range is 1-255MINUTES.

SYSTEM CONFIG>TELNET USER LIST>LEVEL

This is the security level granted to the user. The table below gives a brief description of each level. The factory default is 0.

Select level...

If you want the user to....

 

 

5

Have read-only permission for all menu items - minimum rights

 

 

4

Have read permission for all menu items and permission to use test commands

 

 

3

Have access to all commands except passwords, flash download,

authentication methods, interface configurations, and telnet security levels.

 

 

 

2

Have access to all commands except passwords, flash download,

authentication methods, and telnet security levels.

 

 

 

1

Have access to all commands except passwords and telnet security levels.

 

 

0

Have permission to edit every menu item, including creating and editing

passwords --maximum rights

 

 

 

Router Only

Have read access to all menu items and write access to only the router menu.

 

 

SYSTEM CONFIG>TELNET IP ACCESS LIST

SYSTEM CONFIG>TELNET IP ACCESS LIST>NETWORK ADDRESS AND MASK

This is a list of allowed telnet managers. Enter a network address and subnet mask from which telnet access to the Total Access 600R is allowed. When a remote unit requests telnet access to the Total Access 600R, if the access list is empty or the remote’s IP address matches a list entry, remote access is granted. A subnet mask of 0.0.0.0 will allow any host telnet access, regardless of the network address. A network address of 0.0.0.0 with a corresponding netmask of 255.255.255.255 will disallow any host telnet access.

The factory default is 0.0.0.0 for both parameters, which will allow all users telnet IP access.

Page 24

© 2002, ADTRAN, Inc.

64200600L1#T-31A

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Total Access 600R Trademarks To the Holder of the ManualSafety Instructions REN/SOC FIC Usoc Federal Communications Commission FCC Statement Total Access 600R User Interface Guide UIG Affidavit Requirements for Connection to Digital Services Total Access 600R User Interface Guide UIG Total Access 600R User Interface Guide UIG Warranty and Customer Service Limited Product WarrantyCustomer Service, Product Support Information, and Training Repair and ReturnPre-Sales Inquiries and Applications Support Installation and Maintenance Support Post-Sale SupportTraining Total Access 600R User Interface Guide Table of ContentsFigures Terminal Menu Window Menu Path Left PaneStatus Extended Help Navigation Help Tool Tip System TimeWindow Panes Navigating using the Keyboard Keys Window Pane NavigationRight Window Pane Notation Moving through the Menus Configuration Keystrokes Password Security Level Selecting the Appropriate MenuSecurity Levels Security Level DescriptionSystem Info System Infosystem NameSystem Infosystem Location System Infosystem ContactSystem Infobootcode Revision System Infopart NumberSystem Infoserial Number System Infofirmware RevisionSystem Config System Configoperating ModeSystem CONFIGT1 Timing Mode System Configtelnet AccessSystem Configtelnet User Listauthen Method System Configtelnet User ListpasswordSystem Configtelnet User Listidle Time Mins System Configtelnet User ListlevelSystem Configsnmp Menu System Configsnmp Menuaccess System Configsnmp MenucommunitiesprivilegeSystem Configsnmp Menucommunitiesmanager IP System Configsnmp Menutrapsmanager IPSystem Configsnmp Menufdlfar END IP Address System Configsnmp Menufdlip NetmaskSystem Configsnmp Menufdllearn Address System Configsnmp Menufdlaccept ALL SnmpSystem Configmaint Port Menubaud Rate System Configmaint Port Menudata BitsSystem Configmaint Port Menuparity System Configmaint Port Menustop BitsSystem Confignetwork Timeadjust for Daylight Saving System Confignetwork Timehost AddressSystem Confignetwork Timerefresh System Confignetwork TimestatusSystem Utilityupgrade Firmwaretftp Server Address System Utilityupgrade Firmwaretftp Server FilenameSystem Utilityupgrade Firmwaretransfer Status System Utilityupgrade Firmwarestart TransferSystem Utilityconfig Transfertransfer Type System Utilityconfig Transfertftp Server IP AddressSystem Utilityconfig Transfertftp Server Filename System Utilityconfig Transfercurrent Transfer StatusSystem Utilityterminal Mode System Utilityping System UTILITYPINGSTART/STOPSystem Utilitypinghost Address System Utilitypingsource AddressRouterconfig Routerconfigglobal Router MenusRouterconfigglobalip ModeStatic Routes Dhcp ServerRouterconfigglobalbridge RouterconfigglobalsecurityAuthentication UDP RelayRadius Server PPPHexadecimal format Default is Filter DefinesIP address compared to the source address dotted decimal Routerconfigethernet Routerconfigethernetprimary IPRIP Routerconfigethernetsecondary IPS Routerconfigethernetmac AddressRouterconfigwan Proxy ARPROUTERCONFIGWANL2 Protocol Routerconfigwanppp ProfileNAT Total Access 600R User Interface Guide UIG SPECIFIED. Default is PPP peer’s IP address or network can be set here, if known Bridge Filters Fined in the F Ilters /I N E Xceptions listRouterconfigwanframe Relay Maintenance ProtocolPolling Frequency Dlci Mapping 0.0 TCP or UDP Choices are ANY Port and SPECIFIED. Default is ANY Port Bridge Map Filter Maintenance Dlci Becn Timeout msecRouterstatus Routerstatussession Routerstatussessionppp SessionRouterstatussessionframe Relay PortPVC’s Routerstatusarp CacheRouterstatusarp Cacheip Address Routerstatusarp Cachemac AddressRouterstatusarp Cachetime Routerstatusbridge TableRouterstatusbridge Tablemac Address Routerstatusbridge TableportRouterstatusip Routesflags Routerstatusip RouteshopsRouterstatusip Routesttl Routerstatuswan StatsRouterstatusip Stats RouterlogsRouterlogssyslog Host Routerlogsppp LOGModules Menus Modulesmodules ModulesmodulessltModulesmodulestype ModulesmodulesmenuModulesmodulesalarm ModulesmodulesmenuformatModulesmodulesmenuline Code ModulesmodulesmenuequalizationModulesmodulestest Modulesmodulestestloc LBModulesmodulestestrem LB Modulesmodulestesttest StatusModulesmodulesstatuslcv ModulesmodulesstatusslpModulesmodulesstatusuas MODULESDS0 MapsMODULESDS0 Mapsmap 2SLOT MODULESDS0 Mapsmap 2PORTDS0 Mapping DS0 Mapping Instructions Step ActionSetting up Routing Options Global IP SetupGlobal IP Setup Instructions Step ActionEthernet IP Setup Ethernet IP Setup Instructions Step Action WAN IP Setup WAN IP Setup PPP IP Setup InstructionsWAN IP Setup Frame Relay IP Setup Instructions Total Access 600R User Interface Guide UIG WAN IP Setup IP Routing with NAT Step ActionSetting up Bridging Options WAN Bridging PPP Bridge Setup Instructions Step ActionWAN Bridging PPP Bridge Setup Instructions WAN Bridging Frame Relay Bridge Setup Map DLCIs Step ActionTotal Access 600R User Interface Guide UIG

600R specifications

The ADTRAN 600R is a sophisticated router designed to meet the demands of modern telecommunications and networking environments. This device is specifically engineered to support high-speed connectivity and efficient data transmission, making it a preferred choice for service providers and enterprises alike. It integrates advanced features and technologies that enhance performance, scalability, and flexibility.

One of the standout features of the ADTRAN 600R is its robust support for various WAN technologies. It offers versatile connectivity options, including Ethernet, T1, and DS3 interfaces, allowing seamless integration with existing network infrastructures. This adaptability is crucial for organizations looking to upgrade their systems without undergoing a complete overhaul.

In terms of performance, the ADTRAN 600R is equipped with a powerful processor, enabling it to handle high traffic loads efficiently. With support for multiple Gigabit Ethernet and a high-capacity backplane, the router ensures minimal latency and maximizes throughput, making it ideal for bandwidth-intensive applications such as video conferencing, cloud services, and real-time data processing.

The ADTRAN 600R also prioritizes security and reliability. It incorporates advanced security features such as built-in firewalls and virtual private network (VPN) capabilities. These features provide strong protection against cyber threats while facilitating secure remote access for users. The router's high availability and redundancy options, including load balancing and failover capabilities, ensure continuous operation even in the event of hardware failure.

Management and configuration of the ADTRAN 600R are simplified with a user-friendly interface and support for SNMP and CLI management. This ease of use allows network administrators to monitor performance, troubleshoot issues, and implement changes swiftly, enhancing overall network efficiency. Additionally, the router supports Quality of Service (QoS) protocols, ensuring that critical applications receive the appropriate bandwidth and priority.

In conclusion, the ADTRAN 600R is a feature-rich router that combines cutting-edge technology, high performance, and comprehensive security features. Its flexibility in supporting various WAN technologies and management tools makes it an excellent choice for businesses seeking to enhance their networking capabilities. With its ability to deliver reliable and efficient connectivity, the ADTRAN 600R stands out as a strategic asset for any organization aiming to thrive in a data-driven world.
Top Page Image Contents