Total Access 600R User Interface Guide (UIG)
MODULES>MODULES>TEST
These options are used to initiate local and remote loopback tests and display the test status.
MODULES>MODULES>TEST>LOC LB
Loopback of the local unit. Choices are NONE, LINE, and PAYLOAD. LINE LOOPBACK loops all of the received data back toward the network. The transmitted data is the identical line code that was received, including any bipolar violations. PAYLOAD LOOPBACK is similar to line loopback except that the framing is extracted from the received data and then regenerated for the transmitted data. NONE disables the loopback test. Default is NONE.
MODULES>MODULES>TEST>REM LB
Loopback of remote unit. Choices are NONE, LINE, and PAYLOAD. LINE LOOPBACK loops all of the received data back toward the network. The transmitted data is the identical line code that was received, including any bipolar violations. PAYLOAD LOOPBACK is similar to line loopback except that the framing is extracted from the received data and then regenerated for the transmitted data. NONE disables the loopback test. Default is NONE.
MODULES>MODULES>TEST>TEST STATUS
Indicates whether a test is in progress.
MODULES>MODULES>STATUS
Displays T1 performance data.
MODULES>MODULES>STATUS>TIME FRAME
Choices are CURRENT, 15 MIN, and 24 HR. Default is CURRENT. The performance fields
MODULES>MODULES>STATUS>CLEAR
Clears information for the T1 port. Press Enter when the cursor is over this field to clear the data.
MODULES>MODULES>STATUS>ES
Errored Seconds. An ES is a second with one or more error events or one or more Out Of Frame events or one or more Controlled Slips.
MODULES>MODULES>STATUS>SES
Severely Errored Seconds. An SES is a second with 320 or more error events or one or more Out Of Frame events.
MODULES>MODULES>STATUS>SEF
Severely Errored Frames.
MODULES>MODULES>STATUS>FS
Frame Sync Errors.
© 2002, ADTRAN, Inc. | Page 63 |