ADTRAN 600R manual Filter Defines, Hexadecimal format Default is

Page 36

Total Access 600R User Interface Guide (UIG)

Filter Defines

The 600R can filter packets based on certain parameters within the packet. The method used by the 600R allows the highest flexibility for defining filters and assigning them to a PVC or PPP link. The fil- ters are set up in two steps: (1) defining the filter types, and (2) applying them to a list under the PVC or PPP configuration. This menu is used to define the individual filter defines based on packet type.

The FILTER DEFINES option applies to both Frame Relay and PPP applications.

MAC FILTER DEFINES

The MAC filter is applied to bridge packets only. Bridge packets which are forwarded by the bridge functionality of the Total Access 600R are defined here. Up to 32 MAC defines can be specified.

NAME

SRC ADDR

Identifies the filter entry. Default is no entry in name field.

48-bit MAC source address used for com- parison. (hexadecimal format) Default is 00:00:00:00:00:00.

SRC MASK

DEST ADDR

DEST MASK

TYPE

Bits in the MAC source address which are compared. (hexadecimal format) Default is 00:00:00:00:00:00.

48-bit MAC destination address used for comparison. (hexadecimal format) Default is 00:00:00:00:00:00.

Bits in the MAC destination address used for comparison. (hexadecimal format) Default is 00:00:00:00:00:00.

16-bit type field used for comparison. (hexadecimal format) Default is 00:00.

TYPE MASK

Bits in the type field used for comparison.

 

(hexadecimal format) Default is 00:00.

PATTERN FILTER DEFINES

The pattern filter is applied to bridge packets only. That is any packet which is forwarded by the bridge functionality of the Total Access 600R. Up to 32 pattern defines can be specified.

NAME

Identifies the filter entry. Default is no entry in name field.

OFFSET

Offset from beginning of packet of where to start the pattern

 

comparison. Default is 0.

PATTERN

MASK

64 bits used for comparison. (hexadecimal format) Default is

00:00:00:00:00:00:00:00.

Bits in the pattern to be compared. (hexadecimal format) Default is 00:00:00:00:00:00:00:00.

Page 36

© 2002, ADTRAN, Inc.

64200600L1#T-31A

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Total Access 600R Trademarks To the Holder of the ManualSafety Instructions REN/SOC FIC Usoc Federal Communications Commission FCC Statement Total Access 600R User Interface Guide UIG Affidavit Requirements for Connection to Digital Services Total Access 600R User Interface Guide UIG Total Access 600R User Interface Guide UIG Warranty and Customer Service Limited Product WarrantyCustomer Service, Product Support Information, and Training Repair and ReturnPre-Sales Inquiries and Applications Support Installation and Maintenance Support Post-Sale SupportTraining Total Access 600R User Interface Guide Table of ContentsFigures Terminal Menu Window Menu Path Left PaneStatus Extended Help Navigation Help Tool Tip System TimeWindow Panes Navigating using the Keyboard Keys Window Pane NavigationRight Window Pane Notation Moving through the Menus Configuration Keystrokes Password Security Level Selecting the Appropriate MenuSecurity Levels Security Level DescriptionSystem Info System Infosystem NameSystem Infosystem Location System Infosystem ContactSystem Infobootcode Revision System Infopart NumberSystem Infoserial Number System Infofirmware RevisionSystem Config System Configoperating ModeSystem CONFIGT1 Timing Mode System Configtelnet AccessSystem Configtelnet User Listauthen Method System Configtelnet User ListpasswordSystem Configtelnet User Listidle Time Mins System Configtelnet User ListlevelSystem Configsnmp Menu System Configsnmp Menuaccess System Configsnmp MenucommunitiesprivilegeSystem Configsnmp Menucommunitiesmanager IP System Configsnmp Menutrapsmanager IPSystem Configsnmp Menufdlfar END IP Address System Configsnmp Menufdlip NetmaskSystem Configsnmp Menufdllearn Address System Configsnmp Menufdlaccept ALL SnmpSystem Configmaint Port Menubaud Rate System Configmaint Port Menudata BitsSystem Configmaint Port Menuparity System Configmaint Port Menustop BitsSystem Confignetwork Timeadjust for Daylight Saving System Confignetwork Timehost AddressSystem Confignetwork Timerefresh System Confignetwork TimestatusSystem Utilityupgrade Firmwaretftp Server Address System Utilityupgrade Firmwaretftp Server FilenameSystem Utilityupgrade Firmwaretransfer Status System Utilityupgrade Firmwarestart TransferSystem Utilityconfig Transfertransfer Type System Utilityconfig Transfertftp Server IP AddressSystem Utilityconfig Transfertftp Server Filename System Utilityconfig Transfercurrent Transfer StatusSystem Utilityterminal Mode System Utilityping System UTILITYPINGSTART/STOPSystem Utilitypinghost Address System Utilitypingsource AddressRouterconfig Routerconfigglobal Router MenusRouterconfigglobalip ModeStatic Routes Dhcp ServerRouterconfigglobalbridge RouterconfigglobalsecurityAuthentication UDP RelayRadius Server PPPHexadecimal format Default is Filter DefinesIP address compared to the source address dotted decimal Routerconfigethernet Routerconfigethernetprimary IPRIP Routerconfigethernetsecondary IPS Routerconfigethernetmac AddressRouterconfigwan Proxy ARPROUTERCONFIGWANL2 Protocol Routerconfigwanppp ProfileNAT Total Access 600R User Interface Guide UIG SPECIFIED. Default is PPP peer’s IP address or network can be set here, if known Bridge Filters Fined in the F Ilters /I N E Xceptions listRouterconfigwanframe Relay Maintenance ProtocolPolling Frequency Dlci Mapping 0.0 TCP or UDP Choices are ANY Port and SPECIFIED. Default is ANY Port Bridge Map Filter Maintenance Dlci Becn Timeout msecRouterstatus Routerstatussession Routerstatussessionppp SessionRouterstatussessionframe Relay PortPVC’s Routerstatusarp CacheRouterstatusarp Cacheip Address Routerstatusarp Cachemac AddressRouterstatusarp Cachetime Routerstatusbridge TableRouterstatusbridge Tablemac Address Routerstatusbridge TableportRouterstatusip Routesflags Routerstatusip RouteshopsRouterstatusip Routesttl Routerstatuswan StatsRouterstatusip Stats RouterlogsRouterlogssyslog Host Routerlogsppp LOGModules Menus Modulesmodules ModulesmodulessltModulesmodulestype ModulesmodulesmenuModulesmodulesalarm ModulesmodulesmenuformatModulesmodulesmenuline Code ModulesmodulesmenuequalizationModulesmodulestest Modulesmodulestestloc LBModulesmodulestestrem LB Modulesmodulestesttest StatusModulesmodulesstatuslcv ModulesmodulesstatusslpModulesmodulesstatusuas MODULESDS0 MapsMODULESDS0 Mapsmap 2SLOT MODULESDS0 Mapsmap 2PORTDS0 Mapping DS0 Mapping Instructions Step ActionSetting up Routing Options Global IP SetupGlobal IP Setup Instructions Step ActionEthernet IP Setup Ethernet IP Setup Instructions Step Action WAN IP Setup WAN IP Setup PPP IP Setup InstructionsWAN IP Setup Frame Relay IP Setup Instructions Total Access 600R User Interface Guide UIG WAN IP Setup IP Routing with NAT Step ActionSetting up Bridging Options WAN Bridging PPP Bridge Setup Instructions Step ActionWAN Bridging PPP Bridge Setup Instructions WAN Bridging Frame Relay Bridge Setup Map DLCIs Step ActionTotal Access 600R User Interface Guide UIG

600R specifications

The ADTRAN 600R is a sophisticated router designed to meet the demands of modern telecommunications and networking environments. This device is specifically engineered to support high-speed connectivity and efficient data transmission, making it a preferred choice for service providers and enterprises alike. It integrates advanced features and technologies that enhance performance, scalability, and flexibility.

One of the standout features of the ADTRAN 600R is its robust support for various WAN technologies. It offers versatile connectivity options, including Ethernet, T1, and DS3 interfaces, allowing seamless integration with existing network infrastructures. This adaptability is crucial for organizations looking to upgrade their systems without undergoing a complete overhaul.

In terms of performance, the ADTRAN 600R is equipped with a powerful processor, enabling it to handle high traffic loads efficiently. With support for multiple Gigabit Ethernet and a high-capacity backplane, the router ensures minimal latency and maximizes throughput, making it ideal for bandwidth-intensive applications such as video conferencing, cloud services, and real-time data processing.

The ADTRAN 600R also prioritizes security and reliability. It incorporates advanced security features such as built-in firewalls and virtual private network (VPN) capabilities. These features provide strong protection against cyber threats while facilitating secure remote access for users. The router's high availability and redundancy options, including load balancing and failover capabilities, ensure continuous operation even in the event of hardware failure.

Management and configuration of the ADTRAN 600R are simplified with a user-friendly interface and support for SNMP and CLI management. This ease of use allows network administrators to monitor performance, troubleshoot issues, and implement changes swiftly, enhancing overall network efficiency. Additionally, the router supports Quality of Service (QoS) protocols, ensuring that critical applications receive the appropriate bandwidth and priority.

In conclusion, the ADTRAN 600R is a feature-rich router that combines cutting-edge technology, high performance, and comprehensive security features. Its flexibility in supporting various WAN technologies and management tools makes it an excellent choice for businesses seeking to enhance their networking capabilities. With its ability to deliver reliable and efficient connectivity, the ADTRAN 600R stands out as a strategic asset for any organization aiming to thrive in a data-driven world.
Top Page Image Contents