ADTRAN 600R manual PPP peer’s IP address or network can be set here, if known

Page 44

Total Access 600R User Interface Guide (UIG)

SERVER PORT

TIME

IN CNT

OUT CNT

NAPT ADDRESS

ENTRY COUNT

This option is only available when NAT PORT TRANSLATION is enabled. This is the port used on the public side.

This option is only available when NAT PORT TRANSLATION is enabled. This is the time since the entry was last used.

This option is only available when NAT PORT TRANSLATION is enabled. This is the number of packets that came in.

This option is only available when NAT PORT TRANSLATION is enabled. This is the number of packets sent out.

This option is only available when NAT PORT TRANSLATION is enabled. Represents the public address that is being used as the NAPT address. Read-only.

This option is only available when NAT PORT TRANSLATION is enabled. The number of entries in the NAT table. Maximum is 1500.

ENTRY OVERFLOW

COUNT

ROUTE

This option is only available when NAT PORT TRANSLATION is enabled. A count of the dropped entries due to entry count being 1500 or greater; i.e., the NAT table is full.

The IP parameters are configured in this menu. For unnumbered interfaces, the Total Access 600R will automatically discover the PPP peer’s networks using PPP IPCP and/or RIP.

FAR-ENDIP/NET

The PPP peer’s IP address or network can be set here, if known.

 

Leaving this at 0.0.0.0 means that the Total Access 600R will de-

 

termine the PPP peer’s IP and network (if unnumbered) using

 

the PPP IPCP. Default is 0.0.0.0.

NETMASK

This network mask is applied to the IP/NET address for

STATIC ROUTE

PRIVATE

HOPS (1-16)

FORCE IP

LOCAL IP

determining the PPP peer’s network. If left as 0.0.0.0, a standard network mask is used. Default is 0.0.0.0.

Selecting YES will add a static route to the remote peer to the route table. Default is YES.

Selecting YES will prevent this route from being adver- tised. Default is NO.

This value is the metric or number of hops that RIP will use in advertising the static route. The range is 1 to 16, where 1 is the default. The value 16 is considered an infi- nite distance in RIP and is, in effect, poisoning the route. When set to YES, the 600R will force the PPP peer to use

the IP address in the IP/Net for this profile as its WAN IP address. Normally this is set in the NO position. Default is

NO.

This is the IP address that is assigned to the PPP link when

using numbered links. By default, no address is assigned and the PPP link is unnumbered. Default is 0.0.0.0.

RIP

Use this menu to enable RIP on the WAN interface.

Page 44

© 2002, ADTRAN, Inc.

64200600L1#T-31A

Page 43 Page 45
Image 44
Page 43 Page 45
Contents Total Access 600R Trademarks To the Holder of the ManualSafety Instructions REN/SOC FIC Usoc Federal Communications Commission FCC Statement Total Access 600R User Interface Guide UIG Affidavit Requirements for Connection to Digital Services Total Access 600R User Interface Guide UIG Total Access 600R User Interface Guide UIG Warranty and Customer Service Limited Product WarrantyPre-Sales Inquiries and Applications Support Customer Service, Product Support Information, and TrainingRepair and Return Training Installation and Maintenance SupportPost-Sale Support Total Access 600R User Interface Guide Table of ContentsFigures Terminal Menu Window Menu Path Left PaneStatus Extended Help Navigation Help Tool Tip System TimeWindow Panes Right Window Pane Notation Navigating using the Keyboard KeysWindow Pane Navigation Moving through the Menus Configuration Keystrokes Password Security Level Selecting the Appropriate MenuSecurity Levels Security Level DescriptionSystem Info System Infosystem NameSystem Infosystem Location System Infosystem ContactSystem Infobootcode Revision System Infopart NumberSystem Infoserial Number System Infofirmware RevisionSystem Config System Configoperating ModeSystem CONFIGT1 Timing Mode System Configtelnet AccessSystem Configtelnet User Listauthen Method System Configtelnet User ListpasswordSystem Configtelnet User Listidle Time Mins System Configtelnet User ListlevelSystem Configsnmp Menu System Configsnmp Menuaccess System Configsnmp MenucommunitiesprivilegeSystem Configsnmp Menucommunitiesmanager IP System Configsnmp Menutrapsmanager IPSystem Configsnmp Menufdlfar END IP Address System Configsnmp Menufdlip NetmaskSystem Configsnmp Menufdllearn Address System Configsnmp Menufdlaccept ALL SnmpSystem Configmaint Port Menubaud Rate System Configmaint Port Menudata BitsSystem Configmaint Port Menuparity System Configmaint Port Menustop BitsSystem Confignetwork Timeadjust for Daylight Saving System Confignetwork Timehost AddressSystem Confignetwork Timerefresh System Confignetwork TimestatusSystem Utilityupgrade Firmwaretftp Server Address System Utilityupgrade Firmwaretftp Server FilenameSystem Utilityupgrade Firmwaretransfer Status System Utilityupgrade Firmwarestart TransferSystem Utilityconfig Transfertransfer Type System Utilityconfig Transfertftp Server IP AddressSystem Utilityconfig Transfertftp Server Filename System Utilityconfig Transfercurrent Transfer StatusSystem Utilityterminal Mode System Utilityping System UTILITYPINGSTART/STOPSystem Utilitypinghost Address System Utilitypingsource AddressRouterconfig Routerconfigglobal Router MenusRouterconfigglobalip ModeStatic Routes Dhcp ServerRouterconfigglobalbridge RouterconfigglobalsecurityAuthentication UDP RelayRadius Server PPPHexadecimal format Default is Filter DefinesIP address compared to the source address dotted decimal RIP RouterconfigethernetRouterconfigethernetprimary IP Routerconfigethernetsecondary IPS Routerconfigethernetmac AddressRouterconfigwan Proxy ARPROUTERCONFIGWANL2 Protocol Routerconfigwanppp ProfileNAT Total Access 600R User Interface Guide UIG SPECIFIED. Default is PPP peer’s IP address or network can be set here, if known Bridge Filters Fined in the F Ilters /I N E Xceptions listPolling Frequency Routerconfigwanframe RelayMaintenance Protocol Dlci Mapping 0.0 TCP or UDP Choices are ANY Port and SPECIFIED. Default is ANY Port Bridge Map Filter Routerstatus Maintenance DlciBecn Timeout msec Routerstatussession Routerstatussessionppp SessionRouterstatussessionframe Relay PortPVC’s Routerstatusarp CacheRouterstatusarp Cacheip Address Routerstatusarp Cachemac AddressRouterstatusarp Cachetime Routerstatusbridge TableRouterstatusbridge Tablemac Address Routerstatusbridge TableportRouterstatusip Routesflags Routerstatusip RouteshopsRouterstatusip Routesttl Routerstatuswan StatsRouterstatusip Stats RouterlogsRouterlogssyslog Host Routerlogsppp LOGModules Menus Modulesmodules ModulesmodulessltModulesmodulestype ModulesmodulesmenuModulesmodulesalarm ModulesmodulesmenuformatModulesmodulesmenuline Code ModulesmodulesmenuequalizationModulesmodulestest Modulesmodulestestloc LBModulesmodulestestrem LB Modulesmodulestesttest StatusModulesmodulesstatuslcv ModulesmodulesstatusslpModulesmodulesstatusuas MODULESDS0 MapsMODULESDS0 Mapsmap 2SLOT MODULESDS0 Mapsmap 2PORTDS0 Mapping DS0 Mapping Instructions Step ActionSetting up Routing Options Global IP SetupGlobal IP Setup Instructions Step ActionEthernet IP Setup Ethernet IP Setup Instructions Step Action WAN IP Setup WAN IP Setup PPP IP Setup InstructionsWAN IP Setup Frame Relay IP Setup Instructions Total Access 600R User Interface Guide UIG WAN IP Setup IP Routing with NAT Step ActionSetting up Bridging Options WAN Bridging PPP Bridge Setup Instructions Step ActionWAN Bridging PPP Bridge Setup Instructions WAN Bridging Frame Relay Bridge Setup Map DLCIs Step ActionTotal Access 600R User Interface Guide UIG

600R specifications

The ADTRAN 600R is a sophisticated router designed to meet the demands of modern telecommunications and networking environments. This device is specifically engineered to support high-speed connectivity and efficient data transmission, making it a preferred choice for service providers and enterprises alike. It integrates advanced features and technologies that enhance performance, scalability, and flexibility.

One of the standout features of the ADTRAN 600R is its robust support for various WAN technologies. It offers versatile connectivity options, including Ethernet, T1, and DS3 interfaces, allowing seamless integration with existing network infrastructures. This adaptability is crucial for organizations looking to upgrade their systems without undergoing a complete overhaul.

In terms of performance, the ADTRAN 600R is equipped with a powerful processor, enabling it to handle high traffic loads efficiently. With support for multiple Gigabit Ethernet and a high-capacity backplane, the router ensures minimal latency and maximizes throughput, making it ideal for bandwidth-intensive applications such as video conferencing, cloud services, and real-time data processing.

The ADTRAN 600R also prioritizes security and reliability. It incorporates advanced security features such as built-in firewalls and virtual private network (VPN) capabilities. These features provide strong protection against cyber threats while facilitating secure remote access for users. The router's high availability and redundancy options, including load balancing and failover capabilities, ensure continuous operation even in the event of hardware failure.

Management and configuration of the ADTRAN 600R are simplified with a user-friendly interface and support for SNMP and CLI management. This ease of use allows network administrators to monitor performance, troubleshoot issues, and implement changes swiftly, enhancing overall network efficiency. Additionally, the router supports Quality of Service (QoS) protocols, ensuring that critical applications receive the appropriate bandwidth and priority.

In conclusion, the ADTRAN 600R is a feature-rich router that combines cutting-edge technology, high performance, and comprehensive security features. Its flexibility in supporting various WAN technologies and management tools makes it an excellent choice for businesses seeking to enhance their networking capabilities. With its ability to deliver reliable and efficient connectivity, the ADTRAN 600R stands out as a strategic asset for any organization aiming to thrive in a data-driven world.
Top Page Image Contents