ADTRAN 600R manual System Utilityping System UTILITYPINGSTART/STOP, System Utilitypinghost Address

Page 31

Total Access 600R User Interface Guide (UIG)

SYSTEM UTILITY>PING

SYSTEM UTILITY>PING>START/STOP

Activator to start and cancel a ping test.

Only one ping session can be active at a time.

SYSTEM UTILITY>PING>HOST ADDRESS

IP address or domain name (if DNS is configured) of device to receive the ping. The factory default is no entry in the host address field.

SYSTEM UTILITY>PING>SOURCE ADDRESS

Selects whether the ping packet should use the interface address or the NAPT (if that interface uses NAT) as the source address of the ping packet. This is the address that is used for ICMP requests. Interface means it will use the IP address associated with the WAN for outgoing packets and the Ethernet IP address for ICMP requests made on the LAN.

NAPT address will replace the WAN IP address with the NAPT address for outgoing ICMP requests. Default is

INTERFACE.

SYSTEM UTILITY>PING>SIZE (40-1500)

Total size of the ping to send. Range is 40 to 1500 bytes. The default is 64.

SYSTEM UTILITY>PING># OF PACKETS

Total packets to send every 2 seconds. Setting this to 0 allows the client to ping continuously. The default is 1.

SYSTEM UTILITY>PING># TRANSMITS

Total packets sent (read only).

SYSTEM UTILITY>PING># RECEIVES

Total packets received (read only).

SYSTEM UTILITY>PING>%LOSS

Percentage loss based on ping returned from host (read only).

SYSTEM UTILITY>TERMINAL MODE

The terminal mode gives the user a command-line prompt. From this prompt, you can:

•Perform a reset with the command “reset”

•Perform a factory restore with the command “factory_reset”

•Configure the unit. The Total Access 600R has the ability to download a text file which contains the configuration of the entire unit. This configuration may then be altered in a text editor, and then uploaded to that same or any other Total Access 600R.

•Debug and troubleshooting. This function would be carried out with the assistance of ADTRAN Technical Support.

64200600L1#T-31A

© 2002, ADTRAN, Inc.

Page 31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Total Access 600R To the Holder of the Manual TrademarksSafety Instructions REN/SOC FIC Usoc Federal Communications Commission FCC Statement Total Access 600R User Interface Guide UIG Affidavit Requirements for Connection to Digital Services Total Access 600R User Interface Guide UIG Total Access 600R User Interface Guide UIG Limited Product Warranty Warranty and Customer ServiceRepair and Return Customer Service, Product Support Information, and TrainingPre-Sales Inquiries and Applications Support Post-Sale Support Installation and Maintenance SupportTraining Table of Contents Total Access 600R User Interface GuideFigures Extended Help Navigation Help Tool Tip System Time Terminal Menu WindowMenu Path Left Pane StatusWindow Panes Window Pane Navigation Navigating using the Keyboard KeysRight Window Pane Notation Moving through the Menus Configuration Keystrokes Security Level Description Password Security LevelSelecting the Appropriate Menu Security LevelsSystem Infosystem Contact System InfoSystem Infosystem Name System Infosystem LocationSystem Infofirmware Revision System Infobootcode RevisionSystem Infopart Number System Infoserial NumberSystem Configtelnet Access System ConfigSystem Configoperating Mode System CONFIGT1 Timing ModeSystem Configtelnet User Listlevel System Configtelnet User Listauthen MethodSystem Configtelnet User Listpassword System Configtelnet User Listidle Time MinsSystem Configsnmp Menutrapsmanager IP System Configsnmp Menu System Configsnmp MenuaccessSystem Configsnmp Menucommunitiesprivilege System Configsnmp Menucommunitiesmanager IPSystem Configsnmp Menufdlaccept ALL Snmp System Configsnmp Menufdlfar END IP AddressSystem Configsnmp Menufdlip Netmask System Configsnmp Menufdllearn AddressSystem Configmaint Port Menustop Bits System Configmaint Port Menubaud RateSystem Configmaint Port Menudata Bits System Configmaint Port MenuparitySystem Confignetwork Timestatus System Confignetwork Timeadjust for Daylight SavingSystem Confignetwork Timehost Address System Confignetwork TimerefreshSystem Utilityupgrade Firmwarestart Transfer System Utilityupgrade Firmwaretftp Server AddressSystem Utilityupgrade Firmwaretftp Server Filename System Utilityupgrade Firmwaretransfer StatusSystem Utilityconfig Transfercurrent Transfer Status System Utilityconfig Transfertransfer TypeSystem Utilityconfig Transfertftp Server IP Address System Utilityconfig Transfertftp Server FilenameSystem Utilitypingsource Address System Utilityterminal ModeSystem Utilityping System UTILITYPINGSTART/STOP System Utilitypinghost AddressRouter Menus Routerconfig RouterconfigglobalDhcp Server RouterconfigglobalipMode Static RoutesUDP Relay RouterconfigglobalbridgeRouterconfigglobalsecurity AuthenticationPPP Radius ServerFilter Defines Hexadecimal format Default isIP address compared to the source address dotted decimal Routerconfigethernetprimary IP RouterconfigethernetRIP Proxy ARP Routerconfigethernetsecondary IPSRouterconfigethernetmac Address RouterconfigwanRouterconfigwanppp Profile ROUTERCONFIGWANL2 ProtocolNAT Total Access 600R User Interface Guide UIG SPECIFIED. Default is PPP peer’s IP address or network can be set here, if known Bridge Fined in the F Ilters /I N E Xceptions list FiltersMaintenance Protocol Routerconfigwanframe RelayPolling Frequency Dlci Mapping 0.0 TCP or UDP Choices are ANY Port and SPECIFIED. Default is ANY Port Bridge Map Filter Becn Timeout msec Maintenance DlciRouterstatus Port RouterstatussessionRouterstatussessionppp Session Routerstatussessionframe RelayRouterstatusarp Cachemac Address PVC’sRouterstatusarp Cache Routerstatusarp Cacheip AddressRouterstatusbridge Tableport Routerstatusarp CachetimeRouterstatusbridge Table Routerstatusbridge Tablemac AddressRouterstatuswan Stats Routerstatusip RoutesflagsRouterstatusip Routeshops Routerstatusip RoutesttlRouterlogs Routerstatusip StatsRouterlogsppp LOG Routerlogssyslog HostModulesmodulesmenu Modules Menus ModulesmodulesModulesmodulesslt ModulesmodulestypeModulesmodulesmenuequalization ModulesmodulesalarmModulesmodulesmenuformat Modulesmodulesmenuline CodeModulesmodulestesttest Status ModulesmodulestestModulesmodulestestloc LB Modulesmodulestestrem LBMODULESDS0 Maps ModulesmodulesstatuslcvModulesmodulesstatusslp ModulesmodulesstatusuasMODULESDS0 Mapsmap 2PORT MODULESDS0 Mapsmap 2SLOTDS0 Mapping Instructions Step Action DS0 MappingStep Action Setting up Routing OptionsGlobal IP Setup Global IP Setup InstructionsEthernet IP Setup Ethernet IP Setup Instructions Step Action WAN IP Setup PPP IP Setup Instructions WAN IP SetupWAN IP Setup Frame Relay IP Setup Instructions WAN IP Setup IP Routing with NAT Step Action Total Access 600R User Interface Guide UIGWAN Bridging PPP Bridge Setup Instructions Step Action Setting up Bridging OptionsWAN Bridging Frame Relay Bridge Setup Map DLCIs Step Action WAN Bridging PPP Bridge Setup InstructionsTotal Access 600R User Interface Guide UIG

600R specifications

The ADTRAN 600R is a sophisticated router designed to meet the demands of modern telecommunications and networking environments. This device is specifically engineered to support high-speed connectivity and efficient data transmission, making it a preferred choice for service providers and enterprises alike. It integrates advanced features and technologies that enhance performance, scalability, and flexibility.

One of the standout features of the ADTRAN 600R is its robust support for various WAN technologies. It offers versatile connectivity options, including Ethernet, T1, and DS3 interfaces, allowing seamless integration with existing network infrastructures. This adaptability is crucial for organizations looking to upgrade their systems without undergoing a complete overhaul.

In terms of performance, the ADTRAN 600R is equipped with a powerful processor, enabling it to handle high traffic loads efficiently. With support for multiple Gigabit Ethernet and a high-capacity backplane, the router ensures minimal latency and maximizes throughput, making it ideal for bandwidth-intensive applications such as video conferencing, cloud services, and real-time data processing.

The ADTRAN 600R also prioritizes security and reliability. It incorporates advanced security features such as built-in firewalls and virtual private network (VPN) capabilities. These features provide strong protection against cyber threats while facilitating secure remote access for users. The router's high availability and redundancy options, including load balancing and failover capabilities, ensure continuous operation even in the event of hardware failure.

Management and configuration of the ADTRAN 600R are simplified with a user-friendly interface and support for SNMP and CLI management. This ease of use allows network administrators to monitor performance, troubleshoot issues, and implement changes swiftly, enhancing overall network efficiency. Additionally, the router supports Quality of Service (QoS) protocols, ensuring that critical applications receive the appropriate bandwidth and priority.

In conclusion, the ADTRAN 600R is a feature-rich router that combines cutting-edge technology, high performance, and comprehensive security features. Its flexibility in supporting various WAN technologies and management tools makes it an excellent choice for businesses seeking to enhance their networking capabilities. With its ability to deliver reliable and efficient connectivity, the ADTRAN 600R stands out as a strategic asset for any organization aiming to thrive in a data-driven world.
Top Page Image Contents