ADTRAN 600R manual Modulesmodulesstatuslcv, Modulesmodulesstatusslp, Modulesmodulesstatusuas

Total Access 600R User Interface Guide (UIG)

MODULES>MODULES>STATUS>LCV

Line Code Violations.

MODULES>MODULES>STATUS>SLP

Slip Error Events.

MODULES>MODULES>STATUS>UAS

Unavailable seconds.

MODULES>DS0 MAPS

The MODULES/DS0 MAPS menu allows you to map network T1 time slots to the internal router. You can edit one of two maps stored in nonvolatile memory and make one of the maps the currently active map.

MODULES>DS0 MAPS>ACTIVE MAP

Activates one of the two dedicated maps (MAP 1 or MAP 2). Default is MAP 1.

MODULES>DS0 MAPS>APPLY TEMPLATE TO MAP 1

Choices are CURRENT MAP 1, CURRENT MAP 2, and CLEAR MAP. Default is CURRENT MAP 1. CLEAR MAP clears the entire map.

MODULES>DS0 MAPS>MAP 1

Uses the currently defined map 1. The map 1 allows the user to assign slots and ports to individual DS0s 1-24.

MODULES>DS0 MAPS>MAP 1>DS0

Displays the network T1 time slot to be assigned.

MODULES>DS0 MAPS>MAP 1>SLOT

The first option is OPEN, which unassigns the slot if selected. Use RCU:TA 600 to map network timeslots to the router. Pick the appropriate slot and press <Enter>. Default is OPEN.

MODULES>DS0 MAPS>MAP 1>PORT

The selection list shows only the remaining ports available to be assigned. It may be necessary to unassign a port in order to reassign it elsewhere. For the RCU:TA 600, the port choices are UNASSIGNED, ROUTER 56K, and ROUTER 64K. Default is N/A.

MODULES>DS0 MAPS>MAP 1>RBS

Robbed Bit Signaling is N/A.

MODULES>DS0 MAPS>APPLY TEMPLATE TO MAP 2

Choices are CURRENT MAP 1, CURRENT MAP 2, and CLEAR MAP. Default is CURRENT MAP 2. CLEAR MAP clears the entire map.

MODULES>DS0 MAPS>MAP 2

Define map 2. The map 2 allows the user to assign slots and ports to individual DS0s 1-24.

Page 64 © 2002, ADTRAN, Inc. 64200600L1#T-31A