ADTRAN 600R manual Filter

Page 53

Total Access 600R User Interface Guide (UIG)

mitted out the other DLCIs in the same bridge group. Any device in the bridge group must transmit to each DLCI. This requires a fully meshed circuit, meaning each device has a virtual circuit to each other.

ACTIVE

When this is set to Yes, the 600R will bridge packets to and from this DLCI. Bridge packets are any packets that are not IP packets except when the router is turned off, in which case that particular router’s protocol packets are bridged. A setting of No (def) means that no bridging will occur.

BRIDGE GROUP

The bridge group that this DLCI is part of is specified here as Group 1 (def) or Group 2. These groups correspond to the spanning tree protocols Bridge Group 1 and Bridge Group 2.

Filter

The 600R can block packets in and out of a PVC port by use of the filters. They are set up in two steps: 1) define the types of packets that would be of interest in the CONFIGURATION/SECURITY/FILTER DEFINES menu, and 2) set up the filter type and combination of defines that will cause a packet block.

IN FROM PVC

The packets which come into the Total Access 600R via this PVC can be filtered in three ways:

DISABLE (DEF)

Turns off packet input filtering. No incoming packets from this

 

PVC are blocked.

BLOCK ALL

All incoming packets from this PVC are blocked except as defined

 

in the FILTERS/IN EXCEPTIONS list.

FORWARD ALL

All incoming packets from this PVC are not blocked except as de-

 

fined in the FILTERS/IN EXCEPTIONS list.

IN EXCEPTIONS

This is a list of up to 32 filter entries which can be combined using the operations field. The opera- tions are performed in the order they appear on the list.

ACTIVE

TYPE

MAC (DEF)

PATTERN

IP

FILTER LIST NAME

NEXT OPER

END (DEF)

AND

OR

Turns this entry active when set to Yes. Default is No. Selects the filter define list to reference.

from the CONFIGURATION/SECURITY/FILTER DEFINES/MAC FILTER DEFINES list.

from the CONFIGURATION/SECURITY/FILTER DEFINES/PAT- TERN FILTER DEFINES list.

from the CONFIGURATION/SECURITY/FILTER DEFINES/IP FIL- TER DEFINES list.

Selects between filters defined in the list.

The next operation to use to combine with the next filter in the list:

the last filter to combination.

logically AND this filter with the next filter in the list logically OR this filter with the next filter in the list.

64200600L1#T-31A

© 2002, ADTRAN, Inc.

Page 53

Page 52 Page 54
Image 53
Page 52 Page 54
Contents Total Access 600R To the Holder of the Manual TrademarksSafety Instructions REN/SOC FIC Usoc Federal Communications Commission FCC Statement Total Access 600R User Interface Guide UIG Affidavit Requirements for Connection to Digital Services Total Access 600R User Interface Guide UIG Total Access 600R User Interface Guide UIG Limited Product Warranty Warranty and Customer ServicePre-Sales Inquiries and Applications Support Customer Service, Product Support Information, and TrainingRepair and Return Training Installation and Maintenance SupportPost-Sale Support Table of Contents Total Access 600R User Interface GuideFigures Menu Path Left Pane Terminal Menu WindowStatus Extended Help Navigation Help Tool Tip System TimeWindow Panes Right Window Pane Notation Navigating using the Keyboard KeysWindow Pane Navigation Moving through the Menus Configuration Keystrokes Selecting the Appropriate Menu Password Security LevelSecurity Levels Security Level DescriptionSystem Infosystem Name System InfoSystem Infosystem Location System Infosystem ContactSystem Infopart Number System Infobootcode RevisionSystem Infoserial Number System Infofirmware RevisionSystem Configoperating Mode System ConfigSystem CONFIGT1 Timing Mode System Configtelnet AccessSystem Configtelnet User Listpassword System Configtelnet User Listauthen MethodSystem Configtelnet User Listidle Time Mins System Configtelnet User ListlevelSystem Configsnmp Menucommunitiesprivilege System Configsnmp Menu System Configsnmp MenuaccessSystem Configsnmp Menucommunitiesmanager IP System Configsnmp Menutrapsmanager IPSystem Configsnmp Menufdlip Netmask System Configsnmp Menufdlfar END IP AddressSystem Configsnmp Menufdllearn Address System Configsnmp Menufdlaccept ALL SnmpSystem Configmaint Port Menudata Bits System Configmaint Port Menubaud RateSystem Configmaint Port Menuparity System Configmaint Port Menustop BitsSystem Confignetwork Timehost Address System Confignetwork Timeadjust for Daylight SavingSystem Confignetwork Timerefresh System Confignetwork TimestatusSystem Utilityupgrade Firmwaretftp Server Filename System Utilityupgrade Firmwaretftp Server AddressSystem Utilityupgrade Firmwaretransfer Status System Utilityupgrade Firmwarestart TransferSystem Utilityconfig Transfertftp Server IP Address System Utilityconfig Transfertransfer TypeSystem Utilityconfig Transfertftp Server Filename System Utilityconfig Transfercurrent Transfer StatusSystem Utilityping System UTILITYPINGSTART/STOP System Utilityterminal ModeSystem Utilitypinghost Address System Utilitypingsource AddressRouter Menus Routerconfig RouterconfigglobalMode RouterconfigglobalipStatic Routes Dhcp ServerRouterconfigglobalsecurity RouterconfigglobalbridgeAuthentication UDP RelayPPP Radius ServerFilter Defines Hexadecimal format Default isIP address compared to the source address dotted decimal RIP RouterconfigethernetRouterconfigethernetprimary IP Routerconfigethernetmac Address Routerconfigethernetsecondary IPSRouterconfigwan Proxy ARPRouterconfigwanppp Profile ROUTERCONFIGWANL2 ProtocolNAT Total Access 600R User Interface Guide UIG SPECIFIED. Default is PPP peer’s IP address or network can be set here, if known Bridge Fined in the F Ilters /I N E Xceptions list FiltersPolling Frequency Routerconfigwanframe RelayMaintenance Protocol Dlci Mapping 0.0 TCP or UDP Choices are ANY Port and SPECIFIED. Default is ANY Port Bridge Map Filter Routerstatus Maintenance DlciBecn Timeout msec Routerstatussessionppp Session RouterstatussessionRouterstatussessionframe Relay PortRouterstatusarp Cache PVC’sRouterstatusarp Cacheip Address Routerstatusarp Cachemac AddressRouterstatusbridge Table Routerstatusarp CachetimeRouterstatusbridge Tablemac Address Routerstatusbridge TableportRouterstatusip Routeshops Routerstatusip RoutesflagsRouterstatusip Routesttl Routerstatuswan StatsRouterlogs Routerstatusip StatsRouterlogsppp LOG Routerlogssyslog HostModulesmodulesslt Modules Menus ModulesmodulesModulesmodulestype ModulesmodulesmenuModulesmodulesmenuformat ModulesmodulesalarmModulesmodulesmenuline Code ModulesmodulesmenuequalizationModulesmodulestestloc LB ModulesmodulestestModulesmodulestestrem LB Modulesmodulestesttest StatusModulesmodulesstatusslp ModulesmodulesstatuslcvModulesmodulesstatusuas MODULESDS0 MapsMODULESDS0 Mapsmap 2PORT MODULESDS0 Mapsmap 2SLOTDS0 Mapping Instructions Step Action DS0 MappingGlobal IP Setup Setting up Routing OptionsGlobal IP Setup Instructions Step ActionEthernet IP Setup Ethernet IP Setup Instructions Step Action WAN IP Setup PPP IP Setup Instructions WAN IP SetupWAN IP Setup Frame Relay IP Setup Instructions WAN IP Setup IP Routing with NAT Step Action Total Access 600R User Interface Guide UIGWAN Bridging PPP Bridge Setup Instructions Step Action Setting up Bridging OptionsWAN Bridging Frame Relay Bridge Setup Map DLCIs Step Action WAN Bridging PPP Bridge Setup InstructionsTotal Access 600R User Interface Guide UIG

600R specifications

The ADTRAN 600R is a sophisticated router designed to meet the demands of modern telecommunications and networking environments. This device is specifically engineered to support high-speed connectivity and efficient data transmission, making it a preferred choice for service providers and enterprises alike. It integrates advanced features and technologies that enhance performance, scalability, and flexibility.

One of the standout features of the ADTRAN 600R is its robust support for various WAN technologies. It offers versatile connectivity options, including Ethernet, T1, and DS3 interfaces, allowing seamless integration with existing network infrastructures. This adaptability is crucial for organizations looking to upgrade their systems without undergoing a complete overhaul.

In terms of performance, the ADTRAN 600R is equipped with a powerful processor, enabling it to handle high traffic loads efficiently. With support for multiple Gigabit Ethernet and a high-capacity backplane, the router ensures minimal latency and maximizes throughput, making it ideal for bandwidth-intensive applications such as video conferencing, cloud services, and real-time data processing.

The ADTRAN 600R also prioritizes security and reliability. It incorporates advanced security features such as built-in firewalls and virtual private network (VPN) capabilities. These features provide strong protection against cyber threats while facilitating secure remote access for users. The router's high availability and redundancy options, including load balancing and failover capabilities, ensure continuous operation even in the event of hardware failure.

Management and configuration of the ADTRAN 600R are simplified with a user-friendly interface and support for SNMP and CLI management. This ease of use allows network administrators to monitor performance, troubleshoot issues, and implement changes swiftly, enhancing overall network efficiency. Additionally, the router supports Quality of Service (QoS) protocols, ensuring that critical applications receive the appropriate bandwidth and priority.

In conclusion, the ADTRAN 600R is a feature-rich router that combines cutting-edge technology, high performance, and comprehensive security features. Its flexibility in supporting various WAN technologies and management tools makes it an excellent choice for businesses seeking to enhance their networking capabilities. With its ability to deliver reliable and efficient connectivity, the ADTRAN 600R stands out as a strategic asset for any organization aiming to thrive in a data-driven world.
Top Page Image Contents