ADTRAN 600R manual Routerconfigwanframe Relay, Maintenance Protocol, Polling Frequency

Page 47

Total Access 600R User Interface Guide (UIG)

LAN-TO-WAN (OUT)

The packets which come out toward the WAN from the 600R can be filtered in three ways:

DISABLE (DEF)

Turns off packet output filtering. No outgoing packets are blocked.

BLOCK ALL

All outgoing packets to the WAN are blocked except as defined in

 

the FILTERS/OUT EXCEPTIONS list.

FORWARD ALL

All outgoing packets to the WAN are not blocked except as de-

 

fined in the FILTERS/OUT EXCEPTIONS list.

OUT EXCEPTIONS

This is a list of up to 32 filter entries. The setup is exactly the same as the FILTER/IN EXCEPTIONS list.

ROUTER>CONFIG>WAN>FRAME RELAY

Frame Relay is a connection-oriented service requiring circuits to be configured by your carrier to establish a physical link between two or more locations. Multiple virtual circuits (which appear as vir- tual point-to-point links) can be run through the same physical connection.

There are two types of virtual circuits supported in Frame Relay: Permanent Virtual Circuits (PVC) and Switched Virtual Circuit (SVC). PVCs are like dedicated point-to-point private lines. Since the physical connection is always there in the form of a leased line, call setup and tear down is done by a carrier via a network management system. SVCs require setup and tear down and are generally not available from Frame Relay carriers. Virtually all Frame Relay communications are implemented using PVCs. The Total Access 600R supports PVCs only.

A number called the Data Link Connection Identifier (DLCI) identifies each virtual circuit within a shared physical channel.

Maintenance Protocol

The Frame Relay maintenance protocol is used on the WAN port. The maintenance protocol is used to send link status and virtual circuit information between Frame Relay switches and other devices (such as routers) that communicate with them. Possible choices are listed below.

ANNEX D (DEF)

This is an ANSI standard and is the most commonly used standard

 

in the US.

ANNEX A

This is the CCITT European standard.

LMI

This was developed by a vendor consortium and is also known as

 

the “consortium” management interface specification. It is still

 

used by some carriers in the U.S.

STATIC

This should be selected when there is no Frame Relay switch in the

 

circuit. The DLCIs are assigned in the DLCI Mapping and must be

 

the same for the device it will communicate with.

Polling Frequency (5-30)

This parameter is the interval that the Total Access 600R polls the Frame Relay switch using the main- tenance protocol selected above. The Total Access 600R is required to poll the Frame Relay switch peri- odically to determine whether the link is active. The value is in seconds and ranges from 5 to 30 seconds with a default of 10 seconds.

64200600L1#T-31A

© 2002, ADTRAN, Inc.

Page 47

Page 46 Page 48
Image 47
Page 46 Page 48
Contents Total Access 600R To the Holder of the Manual TrademarksSafety Instructions REN/SOC FIC Usoc Federal Communications Commission FCC Statement Total Access 600R User Interface Guide UIG Affidavit Requirements for Connection to Digital Services Total Access 600R User Interface Guide UIG Total Access 600R User Interface Guide UIG Limited Product Warranty Warranty and Customer ServicePre-Sales Inquiries and Applications Support Customer Service, Product Support Information, and TrainingRepair and Return Training Installation and Maintenance SupportPost-Sale Support Table of Contents Total Access 600R User Interface GuideFigures Extended Help Navigation Help Tool Tip System Time Terminal Menu WindowMenu Path Left Pane StatusWindow Panes Right Window Pane Notation Navigating using the Keyboard KeysWindow Pane Navigation Moving through the Menus Configuration Keystrokes Security Level Description Password Security LevelSelecting the Appropriate Menu Security LevelsSystem Infosystem Contact System InfoSystem Infosystem Name System Infosystem LocationSystem Infofirmware Revision System Infobootcode RevisionSystem Infopart Number System Infoserial NumberSystem Configtelnet Access System ConfigSystem Configoperating Mode System CONFIGT1 Timing ModeSystem Configtelnet User Listlevel System Configtelnet User Listauthen MethodSystem Configtelnet User Listpassword System Configtelnet User Listidle Time MinsSystem Configsnmp Menutrapsmanager IP System Configsnmp Menu System Configsnmp MenuaccessSystem Configsnmp Menucommunitiesprivilege System Configsnmp Menucommunitiesmanager IPSystem Configsnmp Menufdlaccept ALL Snmp System Configsnmp Menufdlfar END IP AddressSystem Configsnmp Menufdlip Netmask System Configsnmp Menufdllearn AddressSystem Configmaint Port Menustop Bits System Configmaint Port Menubaud RateSystem Configmaint Port Menudata Bits System Configmaint Port MenuparitySystem Confignetwork Timestatus System Confignetwork Timeadjust for Daylight SavingSystem Confignetwork Timehost Address System Confignetwork TimerefreshSystem Utilityupgrade Firmwarestart Transfer System Utilityupgrade Firmwaretftp Server AddressSystem Utilityupgrade Firmwaretftp Server Filename System Utilityupgrade Firmwaretransfer StatusSystem Utilityconfig Transfercurrent Transfer Status System Utilityconfig Transfertransfer TypeSystem Utilityconfig Transfertftp Server IP Address System Utilityconfig Transfertftp Server FilenameSystem Utilitypingsource Address System Utilityterminal ModeSystem Utilityping System UTILITYPINGSTART/STOP System Utilitypinghost AddressRouter Menus Routerconfig RouterconfigglobalDhcp Server RouterconfigglobalipMode Static RoutesUDP Relay RouterconfigglobalbridgeRouterconfigglobalsecurity AuthenticationPPP Radius ServerFilter Defines Hexadecimal format Default isIP address compared to the source address dotted decimal RIP RouterconfigethernetRouterconfigethernetprimary IP Proxy ARP Routerconfigethernetsecondary IPSRouterconfigethernetmac Address RouterconfigwanRouterconfigwanppp Profile ROUTERCONFIGWANL2 ProtocolNAT Total Access 600R User Interface Guide UIG SPECIFIED. Default is PPP peer’s IP address or network can be set here, if known Bridge Fined in the F Ilters /I N E Xceptions list FiltersPolling Frequency Routerconfigwanframe RelayMaintenance Protocol Dlci Mapping 0.0 TCP or UDP Choices are ANY Port and SPECIFIED. Default is ANY Port Bridge Map Filter Routerstatus Maintenance DlciBecn Timeout msec Port RouterstatussessionRouterstatussessionppp Session Routerstatussessionframe RelayRouterstatusarp Cachemac Address PVC’sRouterstatusarp Cache Routerstatusarp Cacheip AddressRouterstatusbridge Tableport Routerstatusarp CachetimeRouterstatusbridge Table Routerstatusbridge Tablemac AddressRouterstatuswan Stats Routerstatusip RoutesflagsRouterstatusip Routeshops Routerstatusip RoutesttlRouterlogs Routerstatusip StatsRouterlogsppp LOG Routerlogssyslog HostModulesmodulesmenu Modules Menus ModulesmodulesModulesmodulesslt ModulesmodulestypeModulesmodulesmenuequalization ModulesmodulesalarmModulesmodulesmenuformat Modulesmodulesmenuline CodeModulesmodulestesttest Status ModulesmodulestestModulesmodulestestloc LB Modulesmodulestestrem LBMODULESDS0 Maps ModulesmodulesstatuslcvModulesmodulesstatusslp ModulesmodulesstatusuasMODULESDS0 Mapsmap 2PORT MODULESDS0 Mapsmap 2SLOTDS0 Mapping Instructions Step Action DS0 MappingStep Action Setting up Routing OptionsGlobal IP Setup Global IP Setup InstructionsEthernet IP Setup Ethernet IP Setup Instructions Step Action WAN IP Setup PPP IP Setup Instructions WAN IP SetupWAN IP Setup Frame Relay IP Setup Instructions WAN IP Setup IP Routing with NAT Step Action Total Access 600R User Interface Guide UIGWAN Bridging PPP Bridge Setup Instructions Step Action Setting up Bridging OptionsWAN Bridging Frame Relay Bridge Setup Map DLCIs Step Action WAN Bridging PPP Bridge Setup InstructionsTotal Access 600R User Interface Guide UIG

600R specifications

The ADTRAN 600R is a sophisticated router designed to meet the demands of modern telecommunications and networking environments. This device is specifically engineered to support high-speed connectivity and efficient data transmission, making it a preferred choice for service providers and enterprises alike. It integrates advanced features and technologies that enhance performance, scalability, and flexibility.

One of the standout features of the ADTRAN 600R is its robust support for various WAN technologies. It offers versatile connectivity options, including Ethernet, T1, and DS3 interfaces, allowing seamless integration with existing network infrastructures. This adaptability is crucial for organizations looking to upgrade their systems without undergoing a complete overhaul.

In terms of performance, the ADTRAN 600R is equipped with a powerful processor, enabling it to handle high traffic loads efficiently. With support for multiple Gigabit Ethernet and a high-capacity backplane, the router ensures minimal latency and maximizes throughput, making it ideal for bandwidth-intensive applications such as video conferencing, cloud services, and real-time data processing.

The ADTRAN 600R also prioritizes security and reliability. It incorporates advanced security features such as built-in firewalls and virtual private network (VPN) capabilities. These features provide strong protection against cyber threats while facilitating secure remote access for users. The router's high availability and redundancy options, including load balancing and failover capabilities, ensure continuous operation even in the event of hardware failure.

Management and configuration of the ADTRAN 600R are simplified with a user-friendly interface and support for SNMP and CLI management. This ease of use allows network administrators to monitor performance, troubleshoot issues, and implement changes swiftly, enhancing overall network efficiency. Additionally, the router supports Quality of Service (QoS) protocols, ensuring that critical applications receive the appropriate bandwidth and priority.

In conclusion, the ADTRAN 600R is a feature-rich router that combines cutting-edge technology, high performance, and comprehensive security features. Its flexibility in supporting various WAN technologies and management tools makes it an excellent choice for businesses seeking to enhance their networking capabilities. With its ability to deliver reliable and efficient connectivity, the ADTRAN 600R stands out as a strategic asset for any organization aiming to thrive in a data-driven world.
Top Page Image Contents