
Chapter 7 Installing the Cisco CSR 1000V in Microsoft
Manually Creating the Cisco CSR 1000V VM Using the .iso File (Microsoft
Prerequisites
While the following procedure provides a general guideline for how to manually create the VM for the Cisco CSR 1000V, the exact steps that you need to perform may vary depending on the characteristics of your Microsoft
Note The Cisco CSR 1000V does not support deploying the OVA file in Microsoft
Before installing the Cisco CSR 1000V on a Microsoft
•
•Failover Cluster Manager
•Virtual Switch
Although not required, it is recommended that you create the Virtual Switch prior to creating the VM for the Cisco CSR 1000V.
Configuring the Server Manager Settings
The following steps are performed on Server Manager on the host.
Step 1 On the Server Manager, select Dashboard to configure the local server.
Step 2 Select Manager from the top right, and then select Add Roles and Features from the
The Add Roles and Features Wizard opens.
Step 3 Click Next.
Step 4 Select Server Roles. In the Roles list, select the following options by clicking on the checkbox:
•File and Storage Services
•Hyper-V
Step 5 Select Features. In the Features list, select the following option by clicking on the checkbox:
•Failover Clustering
Failover clustering is required. It is not automatically installed, so you must make sure this option is checked. This feature requires that Failover Cluster Manager is installed.
Step 6 Click Next.
Creating the VM
To create the VM, perform the following steps:
Step 1 In
Step 2 Select New > Virtual Machine.
Cisco CSR 1000V Series Cloud Services Router Software Configuration Guide
|
|
| |
|
|