Cisco Systems CSR 1000V Default Settings, Alert Group Trigger Events and Commands

12-44
Cisco CSR 1000V Series Cloud Services Router Software Configuration Guide
OL-27477-07
Chapter12 Configuring Call Home for the Cisco CSR 1000V
Default Settings
Default Settings
Table12-2 lists the default Call Home settings.
Alert Group Trigger Events and Commands
Call Home trigger events are grouped into alert groups, with each alert group assigned commands to
execute when an event occurs. The command output is included in the transmitted message. Table12-3
lists the trigger events included in each alert group, including the severity level of each event and the
executed commands for the alert group.
Table12-2 Default Call Home Settings
Parameters Default
Call Home feature status Disabled
User-defined profile status Active
Predefined CiscoTAC-1 profile status Inactive
Transport method email
Message format type XML
Alert group status Enabled
Call Home message severity threshold Debug
Message rate limit for messages per minute 20
AAA authorization Disabled
Call Home syslog message throttling Enabled
Data privacy level Normal
Table12-3 Call Home Alert Groups, Events, and Actions
Alert Group
Call Home
Trigger Event Syslog Event Severity Description and Commands Executed
Crash SYSTEM_
CRASH
— — Events related to system crash.
Commands executed:
show version
show logging
show region
show stack
— TRACEBACK — — Detects software traceback events.
Commands executed:
show version
show logging
show region
show stack