Cisco Systems CSR 1000V manual Subscribing to Alert Groups, 12-13

Chapter 12 Configuring Call Home for the Cisco CSR 1000V

How to Configure Call Home

Subscribing to Alert Groups

An alert group is a predefined subset of Call Home alerts supported in all routers. Different types of Call Home alerts are grouped into different alert groups depending on their type. The following alert groups are available:

•Configuration

•Inventory

•Syslog

•Crash

•Snapshot

This section contains the following subsections:

•Periodic Notification, page 12-15

•Message Severity Threshold, page 12-16

•Configuring Snapshot Command List, page 12-17

The triggering events for each alert group are listed in the “Alert Group Trigger Events and Commands” section on page 12-44, and the contents of the alert group messages are listed in the “Message Contents” section on page 12-45.

You can select one or more alert groups to be received by a destination profile.

Note A Call Home alert is sent only to destination profiles that have subscribed to the alert group containing that Call Home alert. In addition, the alert group must be enabled.

To subscribe a destination profile to one or more alert groups, perform the following steps:

SUMMARY STEPS

1.configure terminal

2.call-home

3.alert-group {all configuration inventory syslog crash snapshot}

4.profile name

5.subscribe-to-alert-group configuration [periodic {daily hh:mm monthly date hh:mm weekly day hh:mm}]

6.subscribe-to-alert-group inventory [periodic {daily hh:mm monthly date hh:mm weekly day hh:mm}]

7.subscribe-to-alert-group syslog [severity {catastrophic disaster fatal critical major minor warning notification normal debugging}] [pattern string]

8.subscribe-to-alert-group crash

9.subscribe-to-alert-group snapshot [periodic {daily hh:mm hourly mm interval mm monthly date hh:mm weekly day hh:mm}]

10.end

	Cisco CSR 1000V Series Cloud Services Router Software Configuration Guide
OL-27477-07		12-13