Cisco Systems CSR 1000V manual No shutdown Exit Virtual-service csrmgmt, 15-1

C H A P T E R 15

Configuring Support for Remote Management by the Cisco Prime Network Services Controller

•Configuring the Management Interface to Support Remote Management by the Cisco Prime Network Services Controller

•Configuring Remote Management by Cisco Prime Network Services Controller

Configuring the Management Interface to Support Remote Management by the Cisco Prime Network Services Controller

You can use the Cisco Prime Network Services Controller to provision, manage and monitor the Cisco CSR 1000V. For information on feature support, see the “Managing the Router Using Cisco Prime Network Services Controller” section on page 1-20. This procedure configures the Cisco CSR 1000V management interface to support remote management using the Cisco Prime Network Services Controller.

SUMMARY STEPS

1.enable

2.configure terminal

3.interface mgmt-interface

4.ip address mgmt-ipv4-addr

5.no shutdown

6.exit

7.interface virtualportgroup virtual-port-group-number-number

8.ip unnumbered management-interface

9.no shutdown

10.exit

11.virtual-service csr_mgmt

12.vnic gateway virtualportgroup virtual-port-group-number-number

13.guest ip address remote-mgmt-ipv4-addr

14.exit

	Cisco CSR 1000V Series Cloud Services Router Software Configuration Guide
OL-27477-07		15-1