12-26
Cisco CSR 1000V Series Cloud Services Router Software Configuration Guide
OL-27477-07
Chapter12 Configuring Call Home for the Cisco CSR 1000V
How to Configure Call Home
Sending Call Home Alert Group Messages Manually
You can use the call-home send command to manually send a specific alert group message.
Note the following guidelines when manually sending a Call Home alert group message:
•Only the snapshot, crash, configuration, and inventory alert groups can be sent manually. Syslog
alert groups cannot be sent manually.
•When you manually trigger a snapshot, configuration, or inventory alert group message and you
specify a destination profile name, a message is sent to the destination profile regardless of the
profile’s active status, subscription status, or severity setting.
•When you manually trigger a snapshot, configuration, or inventory alert group message and do not
specify a destination profile name, a message is sent to all active profiles that have either a normal
or periodic subscription to the specified alert group.
To manually trigger Call Home alert group messages, perform the following steps:
SUMMARY STEPS
1. call-home send alert-group snapshot [profile name]
2. call-home send alert-group crash [profile name]
3. call-home send alert-group configuration [profile name]
4. call-home send alert-group inventory [profile name]
DETAILED STEPS
Command or Action Purpose
Step1 call-home send alert-group snapshot [profile name]
Example:
Router# call-home send alert-group snapshot
profile profile1
Sends a snapshot alert group message to one destination
profile if specifed or to all subscribed destination profiles.
Step2 call-home send alert-group crash[profile name]
Example:
Router# call-home send alert-group crash
profile profile1
Sends a crash alert group message to one destination profile
if specified or to all subscribed destination profiles.
Step3 call-home send alert-group configuration [profile
name]
Example:
Router# call-home send alert-group
configuration profile profile1
Sends a configuration alert group message to one
destination profile if specified or to all subscribed
destination profiles.
Step4 call-home send alert-group inventory [profile name]
Example:
Router# call-home send alert-group inventory
profile profile1
Sends an inventory alert group message to one destination
profile if specified or to all subscribed destination profiles.