Cisco Systems CSR 1000V Configuring Diagnostic Signatures, What to Do Next, Before You Begin

Chapter 12 Configuring Call Home for the Cisco CSR 1000V

Configuring Diagnostic Signatures

	Command or Action	Purpose
Step 9
	subscribe-to-alert-group inventory [periodic {daily	Configures a destination profile to send messages for the
	hh:mm monthly day hh:mm weekly day hh:mm}]	Inventory alert group for Call Home.
		• This command is used only for the periodic
	Example:	downloading of DS files.
	Router(cfg-call-home-profile)#
	subscribe-to-alert-group inventory periodic
	daily 14:30
Step 10
	exit	Exits call-home profile configuration mode and returns to
		call-home configuration mode.
	Example:
	Router(cfg-call-home-profile)# exit

What to Do Next

Set the profile configured in the previous procedure as the DS profile and configure other DS parameters.

Configuring Diagnostic Signatures

Before You Begin

Configure the Call Home feature to set attributes for the Call Home profile. You can either use the default CiscoTAC-1 profile or use the newly-created user profile.

SUMMARY STEPS

1.call-home

2.diagnostic-signature

3.profile ds-profile-name

4.environment ds_env-var-name ds-env-var-value

5.end

6.call-home diagnostic-signature {{deinstall download} {ds-id all} install ds-id}

7.show call-home diagnostic-signature [ds-id[actions events prerequisite prompt variables] failure statistics [download]]

DETAILED STEPS

	Command or Action	Purpose
Step 1
	call-home	Enters call-home configuration mode for the configuration
		of Call Home settings.
	Example:
	Router(config)# call-home
Step 2
	diagnostic-signature	Enters call-home diagnostic signature mode.
	Example:
	Router(cfg-call-home)# diagnostic-signature

	Cisco CSR 1000V Series Cloud Services Router Software Configuration Guide
12-36	OL-27477-07