4-13
Cisco CSR 1000V Series Cloud Services Router Software Configuration Guide
OL-27477-07
Chapter4 Installing the Cisco CSR 1000V in VMware ESXi Environments
Deploying the Cisco CSR 1000V OVA Template to the VM
Management vLAN Configures the dot1Q VLAN interface. Requires the
management interface to be configured using the
GigabitEthernetx.xxx format.
Management
Interface IPv4
Address/Mask
Configures the IPv4 address and subnet mask for the
management interface.
Management IPv4
Default Gateway
(Cisco IOS XE
Release 3.11S)
Configures the IPv4 management default gateway address. If
using DHCP, enter “dhcp” in the field.
Management IPv4
Gateway (Cisco IOS
XE Release 3.12S)
Configures the IPv4 management default gateway address. If
using DHCP, enter “dhcp” in the field.
Management IPv4
Network (Cisco IOS
XE Release 3.12S)
Configures the IPv4 Network (such as “192.168.2.0/24” or
“192.168.2.0 255.255.255.0”) that the management gateway
should route to. If a default route (0.0.0.0/0) is desired, this
may be left blank.
Remote Management
IPv4 Address
(Optional) Configures the IP address used for remote
management of the Cisco CSR 1000V by the REST API or by
the Cisco Prime Network Services Controller. The address
must be in the same subnet as the management interface
address.
PNSC IPv4 Address Configures the IP address of the Cisco Prime Network
Services Controller.
This setting is used if you plan to remotely manage the
Cisco CSR 1000V using the Cisco Prime Network Services
Controller.
PNSC Agent Local
Port
(Optional) Configures the Cisco Prime Network Services
Controller service agent SSL port on the local Cisco
CSR 1000V to receive policies from the service manager.
This setting is used if you plan to remotely manage the
Cisco CSR 1000V using the Cisco Prime Network Services
Controller.
PNSC Shared Secret
Key
Configures the Cisco Prime Network Services Controller
shared secret key for the Cisco Prime Network Services
Controller agent to set the SSL certificate from the controller.
This setting is used if you plan to remotely manage the
Cisco CSR 1000V using the Cisco Prime Network Services
Controller.
Router name Configures the hostname of the router.
Features
Enable SCP Server Enables the IOS SCP feature.
Table4-10 OVA Bootstrap Properties for Cisco IOS XE Release 3.11S and Later (continued)
Property Description