Cisco Systems RJ-45-to-AUX Enable trunking on this port to always be on, Assign Vlan names, 356

1912EN(config)# enable password level ? <1−15> Level number

1912EN(config)# enable password level 1 coriolis1 1912EN(config)# enable password level 15 coriolis2 1912EN (config)# enable secret coriolispass

5.Enter Interface Configuration mode to configure the Fast Ethernet 0/27 port on the 1912EN. Enter the switch’s IP address and the default gateway (router):

(config)# interface f0/27

(config−if)#ip address 63.78.39.164 255.255.255.0 (config)#

1912EN(config)#ip default−gateway 63.78.39.254 1912EN(config)#

6. Enable trunking on this port to always be on:

1912EN(config−if)#trunk ?

auto	Set DISL state to AUTO
desirable		Set DISL state to DESIRABLE
nonegotiate		Set DISL state to NONEGOTIATE
off	Set	DISL	state	to OFF
on	Set	DISL	state	to ON

1912EN(config−if)#trunk on

1912EN(config−if)# exit 1912EN (config)#

7. Assign VLAN names:

1912EN(config)#vlan 2 name CAD 1912EN(config)#vlan 3 name Graphics 1912EN(config)#vlan 4 name DocProduction

8. Assign the VLAN number that matches the Ethernet port number on the front of the switch:

1912EN#config terminal

Enter configuration commands, one per line. End with CNTL/Z.

1912EN(config)#interface e0/2 1912EN(config−if)#vlan−membership static ?

<1−1005> ISL VLAN index

1912EN(config−if)#vlan−membership static 2 1912EN(confi−if)# exit

1912EN(config)#interface e0/3 1912EN(config−if)#vlan−membership static 3 1912EN(confi−if)# exit

1912EN(config)#interface e0/4 1912EN(config−if)#vlan−membership static 4 1912EN(config−if)#exit

9. Enable this device to be a VTP server for the Coriolis VTP domain:

1912EN(config)#vtp ?

client	VTP client
domain	Set VTP domain name
password	Set VTP password
pruning	VTP pruning
server	VTP server
transparent VTP transparent
trap	VTP trap
1912EN(config)#vtp domain ?
WORD Name	of the VTP management domain

356