Appendix D: Cisco 1912EN and Catalyst 5000Configuration Practice Lab
Today Joe Snow, our imaginary consultant, has received a Catalyst 1912EN switch, a Catalyst 5000 with a
Supervisor Engine III, and a 24−port 10/100 Ethernet module.
Joe has taken both the switches out of the box and has assembled all the devices into a rack. At present,
neither switch is configured; Joe will be configuring both switches for a lab.

Required Equipment

To complete this lab, you will need:
One Cisco Catalyst 5000 (Cisco 2926G, 2948G, 2980G, 5002, 5500, 5505, 5509, 6006, 6009, 6506,
or 6509 are great Set/Clear command−based IOS substitutes).
•
One Supervisor Engine III Module for the Cisco Catalyst 5000 running IOS version 5.5(2), as shown
here in my show version output:
•
Catalyst5000> (enable) show version
WS−C5000 Software, Version McpSW: 5.5(2) NmpSW: 5.5(2)
Copyright (c) 1995−2000 by Cisco Systems
NMP S/W compiled on Jul 28 2000, 16:43:52
MCP S/W compiled on Jul 28 2000, 16:38:40
System Bootstrap Version: 3.1.2
Hardware Version: 2.0 Model: WS−C5000 Serial #: 011454261
Mod Port Model Serial # Versions
——— ———— —————————— ———————— ——————————————————————————————————————————————————
1 0 WS−X5530 011454261 Hw : 2.0
Fw : 3.1.2
Fw1: 4.2(1)
Sw : 5.5(2)
WS−F5521 011455134 Hw : 1.1
2 24 WS−X5225R 013405523 Hw : 3.1
Fw : 4.3(1)
Sw : 5.5(2)
DRAM FLASH NVRAM
Module Total Used Free Total Used Free Total Used Free
—————— —————— —————— ————— —————— —————— —————— ———— ———— ————
1 32640K 20331K 12309K 8192K 5548K 2644K 512K 185K 327K
Uptime is 2 days, 19 hours, 3 minutes
Catalyst5000> (enable)
One 24−port 10/100BaseTX module, as shown in the following show module output (you can
substitute any 10/00 Ethernet module):
•
Catalyst5000> (enable) show module
Mod Slot Ports Module−Type Model Sub Status
——— ———— ————— —————————————————— ———————————— ——— ————————
1 1 0 Supervisor III WS−X5530 yes ok
2 2 24 10/100BaseTX Ethernet WS−X5225R no ok
Mod Module−Name Serial−Num
—— —————————————— ——————————
1 00011454261
2 00013405523
353